Guangzhou, China · Smart Manufacturing Solutions [email protected] / +86 20 3337 2844
Home/Products/Laser Marking/Dikai U5005 UV Laser Marking Machine
Dikai U5005 UV laser marking machine with touch panel and controller
Laser Marking

Dikai U5005 UV Laser Marking Machine

Dikai U5005 is a compact 355 nm UV laser marking machine with over 5 W at 30 kHz, water cooling, a 10-inch touch screen and five marking fields up to 400 mm, designed for tight installation spaces.

  • Dikai U5005
  • UV 355 nm
  • >5 W at 30 kHz
  • 8,000 mm/s
  • Water cooled
Browse the range
MAISUI product teamUpdated 22 Nov 2026Manufacturer product page and English brochure, 2026

The Dikai U5005 is a UV laser marking machine built for tight installation spaces, with a 355 nm source delivering more than 5 W at 30 kHz. It marks at up to 8,000 mm/s, offers five fields from 70 x 70 mm to 400 x 400 mm, and pairs a water-cooled laser head with a 10-inch industrial touch screen and a separate control cabinet.

Key facts at a glance

Category
UV laser marking machine (coding and marking)
Brand / model
Dikai U5005
Laser source
UV laser, 355 nm
Output power
More than 5 W at 30 kHz
Marking fields
70 x 70 mm to 400 x 400 mm, five options
Scan speed
8,000 mm/s
Cooling
Water chiller
Protection
IP54 laser head

What it is

A UV laser marking machine uses a 355 nm cold beam to change the surface of the packaging or part without heating it enough to distort. That makes it suitable for flexible film and thin plastics where a CO2 laser would burn through, and for marks that need to stay light and readable rather than carbonised. The U5005 is the compact member of the Dikai UV range: the head is 345 x 120 x 143 mm, intended for machines where a full-size UV coder will not fit.

How it works

  1. Mount the laser head at the working distance for the chosen field, in any orientation.
  2. Connect the control cabinet and the touch panel; the water chiller circulates coolant to the head.
  3. Load the message and code content on the 10-inch touch screen.
  4. Trigger one mark per product from the machine signal; 2 inputs and 3 outputs are available.
  5. Check first packs for contrast and grade, then run continuously.

Key capabilities

  • Cold UV marking. The 355 nm source minimises material damage, which is what allows marking on thin film and heat-sensitive packages.
  • Compact head. 345 x 120 x 143 mm and 6.5 kg, so it fits the confined space usually taken by a TTO unit.
  • Five marking fields. 70, 110, 175, 250 and 400 mm square, balancing a small footprint with a usable marking range.
  • Water-cooled stability. The chiller keeps output consistent regardless of ambient temperature swings.
  • 10-inch industrial touch screen. A larger interface than the compact UV coders, reducing operator error.
  • IP54 laser head. Dust and splash protection for the production hall.
  • Rich content. Fonts, Code 39/25/128 and EAN-13 barcodes, PDF417/QR/DataMatrix with GS1 content, and DXF/PLT vector images.
  • Low fume. The cold marking process generates very little fume compared with thermal marking.

Where it fits

Flexible filmStand-up pouchesPE / PPLabelsFoodPharmaceuticalCosmetics

It is aimed at lines where a full-size UV coder will not fit – replacing a TTO head at the same position, or a small pouch machine with limited headroom – while still needing a permanent, high-contrast code. It also suits multi-lens applications where the same unit has to cover a small sachet and a larger pouch.

Technical specifications

Laser type UV laser
Wavelength 355 nm
Output power More than 5 W at 30 kHz
Marking range / working distance 70 x 70 / 132 mm, 110 x 110 / 192 mm, 175 x 175 / 290 mm, 250 x 250 / 395 mm, 400 x 400 / 580 mm
Scan speed 8,000 mm/s
Fonts Single and double line font, dot-matrix font
Barcodes Code 39, Code 25, Code 128, EAN-13 and others
2D codes PDF417, QR code, DataMatrix (GS1)
Images DXF / PLT vector images
Inputs / outputs 2 inputs / 3 outputs
Interface USB 2.0, Ethernet
Cooling Water chiller
Ingress protection IP54 laser head
Power supply 200-240 VAC (100-120 VAC optional), 50/60 Hz
Power consumption Below 450 W
Operating temperature 5 to 40 degrees C
Operating humidity 20 to 80 percent, non-condensing
Weight Laser head 6.5 kg; main control cabinet 3.2 kg; touch panel 0.6 kg
Dimensions Laser head 345 x 120 x 143 mm; touch panel 252 x 168 x 36 mm

Selection checklist

  • Is the installation space as tight as a TTO head position?
  • Which marking field is needed – 70 to 400 mm square?
  • Does the material need cold UV marking to avoid burn-through?
  • Where will the water chiller and control cabinet sit?
  • Which signal does the machine provide to trigger the mark?
  • Does the code need GS1 DataMatrix content?
  • Will the same unit need to switch between lenses?
  • Who will carry out installation and first-line service?

Maintenance and service

There is no ink or ribbon; the service items are the cooling loop, the lens window and the source self-test. Keep the chiller coolant within range and clean the lens on the interval the environment requires. MAISUI supplies the machine, installs it, and provides spare parts and service support.

Frequently asked questions

Can the U5005 replace a TTO printer?

Yes – that is one of its intended positions. The compact head fits the space a TTO occupies, and it needs no ribbon. The mark is permanent and cannot be erased.

What materials can it mark?

Flexible film, PE and PP packaging, labels and similar thin or heat-sensitive materials where a CO2 laser would distort or burn the surface.

Is it air or water cooled?

Water cooled; the chiller is a separate unit and needs space and a power point.

How large a marking field does it have?

Five options from 70 x 70 mm to 400 x 400 mm, with matching working distances.

Does it support 2D codes?

Yes: PDF417, QR code and DataMatrix including GS1 content, plus Code 39, Code 25, Code 128 and EAN-13.

What is the IP rating?

The laser head is IP54 rated, suitable for dust and splashes in a production hall.

Does it generate fume?

Very little compared with thermal marking. Where the material does release fume, local extraction is still the safe practice.

What do I need to prepare for installation?

The head mounting point and working distance, power supply, chiller space, cabinet space and the machine trigger signal.