The Dikai U5005 is a UV laser marking machine built for tight installation spaces, with a 355 nm source delivering more than 5 W at 30 kHz. It marks at up to 8,000 mm/s, offers five fields from 70 x 70 mm to 400 x 400 mm, and pairs a water-cooled laser head with a 10-inch industrial touch screen and a separate control cabinet.
Key facts at a glance
- Category
- UV laser marking machine (coding and marking)
- Brand / model
- Dikai U5005
- Laser source
- UV laser, 355 nm
- Output power
- More than 5 W at 30 kHz
- Marking fields
- 70 x 70 mm to 400 x 400 mm, five options
- Scan speed
- 8,000 mm/s
- Cooling
- Water chiller
- Protection
- IP54 laser head
What it is
A UV laser marking machine uses a 355 nm cold beam to change the surface of the packaging or part without heating it enough to distort. That makes it suitable for flexible film and thin plastics where a CO2 laser would burn through, and for marks that need to stay light and readable rather than carbonised. The U5005 is the compact member of the Dikai UV range: the head is 345 x 120 x 143 mm, intended for machines where a full-size UV coder will not fit.
How it works
- Mount the laser head at the working distance for the chosen field, in any orientation.
- Connect the control cabinet and the touch panel; the water chiller circulates coolant to the head.
- Load the message and code content on the 10-inch touch screen.
- Trigger one mark per product from the machine signal; 2 inputs and 3 outputs are available.
- Check first packs for contrast and grade, then run continuously.
Key capabilities
- Cold UV marking. The 355 nm source minimises material damage, which is what allows marking on thin film and heat-sensitive packages.
- Compact head. 345 x 120 x 143 mm and 6.5 kg, so it fits the confined space usually taken by a TTO unit.
- Five marking fields. 70, 110, 175, 250 and 400 mm square, balancing a small footprint with a usable marking range.
- Water-cooled stability. The chiller keeps output consistent regardless of ambient temperature swings.
- 10-inch industrial touch screen. A larger interface than the compact UV coders, reducing operator error.
- IP54 laser head. Dust and splash protection for the production hall.
- Rich content. Fonts, Code 39/25/128 and EAN-13 barcodes, PDF417/QR/DataMatrix with GS1 content, and DXF/PLT vector images.
- Low fume. The cold marking process generates very little fume compared with thermal marking.
Where it fits
It is aimed at lines where a full-size UV coder will not fit – replacing a TTO head at the same position, or a small pouch machine with limited headroom – while still needing a permanent, high-contrast code. It also suits multi-lens applications where the same unit has to cover a small sachet and a larger pouch.
Technical specifications
| Laser type | UV laser |
|---|---|
| Wavelength | 355 nm |
| Output power | More than 5 W at 30 kHz |
| Marking range / working distance | 70 x 70 / 132 mm, 110 x 110 / 192 mm, 175 x 175 / 290 mm, 250 x 250 / 395 mm, 400 x 400 / 580 mm |
| Scan speed | 8,000 mm/s |
| Fonts | Single and double line font, dot-matrix font |
| Barcodes | Code 39, Code 25, Code 128, EAN-13 and others |
| 2D codes | PDF417, QR code, DataMatrix (GS1) |
| Images | DXF / PLT vector images |
| Inputs / outputs | 2 inputs / 3 outputs |
| Interface | USB 2.0, Ethernet |
| Cooling | Water chiller |
| Ingress protection | IP54 laser head |
| Power supply | 200-240 VAC (100-120 VAC optional), 50/60 Hz |
| Power consumption | Below 450 W |
| Operating temperature | 5 to 40 degrees C |
| Operating humidity | 20 to 80 percent, non-condensing |
| Weight | Laser head 6.5 kg; main control cabinet 3.2 kg; touch panel 0.6 kg |
| Dimensions | Laser head 345 x 120 x 143 mm; touch panel 252 x 168 x 36 mm |
Selection checklist
- Is the installation space as tight as a TTO head position?
- Which marking field is needed – 70 to 400 mm square?
- Does the material need cold UV marking to avoid burn-through?
- Where will the water chiller and control cabinet sit?
- Which signal does the machine provide to trigger the mark?
- Does the code need GS1 DataMatrix content?
- Will the same unit need to switch between lenses?
- Who will carry out installation and first-line service?
Maintenance and service
There is no ink or ribbon; the service items are the cooling loop, the lens window and the source self-test. Keep the chiller coolant within range and clean the lens on the interval the environment requires. MAISUI supplies the machine, installs it, and provides spare parts and service support.
Frequently asked questions
Can the U5005 replace a TTO printer?
Yes – that is one of its intended positions. The compact head fits the space a TTO occupies, and it needs no ribbon. The mark is permanent and cannot be erased.
What materials can it mark?
Flexible film, PE and PP packaging, labels and similar thin or heat-sensitive materials where a CO2 laser would distort or burn the surface.
Is it air or water cooled?
Water cooled; the chiller is a separate unit and needs space and a power point.
How large a marking field does it have?
Five options from 70 x 70 mm to 400 x 400 mm, with matching working distances.
Does it support 2D codes?
Yes: PDF417, QR code and DataMatrix including GS1 content, plus Code 39, Code 25, Code 128 and EAN-13.
What is the IP rating?
The laser head is IP54 rated, suitable for dust and splashes in a production hall.
Does it generate fume?
Very little compared with thermal marking. Where the material does release fume, local extraction is still the safe practice.
What do I need to prepare for installation?
The head mounting point and working distance, power supply, chiller space, cabinet space and the machine trigger signal.