Guangzhou, China · Smart Manufacturing Solutions [email protected] / +86 20 3337 2844
Home/Products/Thermal Transfer Printers/Q420 / Q430 / Q460 Industrial Thermal Transfer Printers
Q420, Q430 and Q460 industrial thermal transfer printer, front view
Thermal Transfer Printers

Q420 / Q430 / Q460 Industrial Thermal Transfer Printers

MAISUI Q series 4-inch light-industrial thermal transfer printers: Q420 at 203 dpi, Q430 at 300 dpi and Q460 at 600 dpi, with 200 mm media rolls, wash-care and silk support.

  • Three 4-inch light-industrial models: Q420 203 dpi, Q430 300 dpi, Q460 600 dpi
  • Media rolls up to 200 mm OD and ribbon capacity up to 450 m
  • Wash-care labels, satin and silk ribbon, tags and self-adhesive labels
  • USB, serial and Ethernet standard; cutter, peeler and RFID options
Browse the range
MAISUI product teamUpdated 22 Nov 2026

The Q420, Q430 and Q460 are MAISUI’s 4-inch light-industrial thermal transfer printers for longer label runs and textile work. The series accepts media rolls up to 200 mm OD and ribbon up to 450 m, prints at 203, 300 or 600 dpi, and handles wash-care labels, satin and silk ribbon, tags and self-adhesive labels with matched consumables from Guangzhou.

Key facts at a glance

Category
4-inch light-industrial thermal transfer printer
Models
Q420, Q430, Q460
Resolution
203 / 300 / 600 dpi, model dependent
Maximum print width
108 mm (Q420); 106 mm (Q430 and Q460)
Print modes
Thermal transfer with ribbon; direct thermal
Interfaces
USB, USB 2.0, serial and Ethernet; Bluetooth and Wi-Fi optional
Media
20-120 mm wide; 0.06-1.0 mm thick; wash-care and silk supported

Which Q model fits which job

The three models share the same 4-inch light-industrial platform and media path. Resolution and throughput are the main differences: choose the model by the smallest text, barcode or 2D code you need to print, then confirm media width and roll size for your label.

Model Resolution Max print speed Max print width Typical fit
Q420 203 dpi (8 dots/mm) 250 mm/s 108 mm General labels, shipping labels, warehouse and asset tags.
Q430 300 dpi (305 dots/inch, 11.8 dots/mm) 200 mm/s 106 mm Dense labels, small text and barcodes, wash-care labels and retail tags.
Q460 600 dpi 100 mm/s 106 mm Micro text, small QR and DataMatrix codes, high-detail film and technical labels.

What the Q series is

The Q series is the light-industrial 4-inch platform in the MAISUI printer range. It is designed for longer runs than the compact JT desktop series, with media rolls up to 200 mm OD, ribbon capacity up to 450 m and a 20-120 mm media path. The front panel has a colour display and keypad for setup, calibration and status.

USB, USB 2.0, serial and Ethernet are standard; Bluetooth and Wi-Fi are available as options for mobile or wireless printing. A cutter, peeler and RFID option are available for automated labelling lines.

How it works

  1. Load a media roll up to 200 mm OD and fit a wax, wax-resin or resin ribbon.
  2. Thread media through the 20-120 mm path and calibrate the sensors for gap, black-mark, continuous or perforated stock.
  3. Create the label template in your labelling software, or send the print job from ERP, WMS or a production system.
  4. Print a test label and check barcode grade, text size and print darkness.
  5. Run the batch and monitor status and consumable levels on the front panel.

Where it fits

Wash-care labelsSatin and silk ribbonProduct and carton labelsShipping labelsWarehouse shelf labelsAsset and equipment tagsRetail price and hang tagsTickets and passes

The Q series is used where labels must survive repeated washing or handling: apparel care labels, satin and silk ribbon, and durable product and asset labels. It also covers dispatch, warehouse shelf and retail tag work, and handles fan-fold and perforated stock for higher-volume production.

Technical specifications

Print technology Thermal transfer (ribbon) and direct thermal
Print resolution Q420: 203 dpi (8 dots/mm); Q430: 300 dpi (305 dots/inch, 11.8 dots/mm); Q460: 600 dpi
Maximum print width Q420: 108 mm; Q430 and Q460: 106 mm
Maximum print speed Q420: 250 mm/s; Q430: 200 mm/s; Q460: 100 mm/s
Maximum print length 3048 mm
Media types Continuous, gap, black-mark, fan-fold and perforated stock; thermal paper, coated paper, synthetic stock, self-adhesive labels, wash-care labels, silk/satin media and tickets
Media size Width 20-120 mm; thickness 0.06-1.0 mm; roll outside diameter up to 200 mm; core 25.4-76.2 mm (1-3 inch)
Ribbon Wax, wax-resin and resin; width up to 110 mm; 450 m on a 0.5-inch core or 300 m on a 1-inch core; ribbon OD up to 75 mm on a 1-inch core
Display Colour display and keypad for setup, calibration and status
Interface USB, USB 2.0, serial and Ethernet standard; Bluetooth and Wi-Fi optional
Memory 256 MB RAM / 16 MB flash
Command sets TSPL, ZPL and EPL
Dimensions 455 x 246 x 285 mm
Power AC 100-240 V, 50/60 Hz; DC 24 V 5 A, 120 W
Operating environment 10-50 °C / 10-93% RH non-condensing; storage -20 to 70 °C
Options Cutter, peeler and RFID option

Ribbons and labels matched to the printer

Q series ribbons are available in wax, wax-resin and resin, up to 110 mm wide and 450 m long on a 0.5-inch core (300 m on a 1-inch core). Wax suits coated paper labels and general work; wax-resin covers synthetic and semi-gloss materials; resin is the starting point for film labels and wash-care labels that must resist heat, washing or chemicals. MAISUI supplies all three ribbon families plus paper, synthetic and security labels, and can pre-test the combination on your material.

Selection checklist

  • Which resolution fits the content: 203 dpi for general labels, 300 dpi for dense text, 600 dpi for micro text and small 2D codes?
  • What media width and roll size does the job use? The Q series accepts 20-120 mm media and rolls up to 200 mm OD.
  • Will labels be wash-care, satin/silk, synthetic or paper? This determines the ribbon and print settings.
  • What is the peak label volume per shift, and does the model’s speed cover it?
  • Which connection does the line need: USB, serial, Ethernet, Bluetooth or Wi-Fi?
  • Do you need a cutter, peeler or RFID option for an automated line?
  • Who will supply and test ribbons and labels to avoid print-quality surprises?

Maintenance and consumables

Print quality depends on the printhead, platen roller and the ribbon-to-media match. Clean the printhead at the interval your dust level requires, replace worn platens, and keep a spare printhead and ribbon stock for critical lines. MAISUI supplies ribbons and labels tested with the Q series so the combination is predictable.

Frequently asked questions

Which Q model should I choose?

Start with resolution and throughput. The Q420 at 203 dpi and 250 mm/s covers general labels, shipping labels and asset tags. The Q430 at 300 dpi and 200 mm/s suits dense labels, small text and wash-care work. The Q460 at 600 dpi and 100 mm/s is for micro text and small 2D codes.

How is the Q series different from the JT series?

The Q series is the light-industrial 4-inch range; the JT series is the compact desktop range. Q models accept media rolls up to 200 mm OD and ribbon up to 450 m, with a 20-120 mm media path and wash-care/silk support. JT models use 127 mm rolls, up to 300 m ribbon and a 25-115 mm media path. Choose Q for longer runs and textile work, JT for bench-side label printing.

Can it print wash-care labels and satin or silk ribbon?

Yes. The Q series handles wash-care labels and silk/satin media within the supported media range. Use a resin or wax-resin ribbon as the starting point and test the exact material and ribbon combination before production.

What media sizes does it accept?

Media width is 20-120 mm and thickness is 0.06-1.0 mm. Roll outside diameter is up to 200 mm, with 25.4-76.2 mm (1-3 inch) cores. Maximum print length is 3048 mm.

Which ribbon should I use?

Wax for coated paper labels and general work, wax-resin for synthetic and semi-gloss materials, and resin for film labels and wash-care labels that must resist heat, washing or chemicals. Q series ribbons are available up to 110 mm wide, with 450 m on a 0.5-inch core or 300 m on a 1-inch core.

Which interfaces are available?

USB, USB 2.0, serial and Ethernet are standard. Bluetooth and Wi-Fi are available as options for mobile or wireless printing.

Does it support a cutter, peeler or RFID?

Yes. A cutter, peeler and RFID option are available depending on the model and configuration. Confirm the option with MAISUI for your line.

Do you supply ribbons, labels and spare parts?

Yes. MAISUI supplies wax, wax-resin and resin ribbons plus paper, synthetic and security labels, and keeps common spare parts for the Q series. Ribbons and labels can be tested with the printer before production.

Can I get a quotation for this product?

Send the model, label size, material and estimated quantity. MAISUI replies with a matched quotation within 24 hours on business days, and confirms lead time together with the quotation.