Guangzhou, China · Smart Manufacturing Solutions [email protected] / +86 20 3337 2844
Home/Products/3D Printers/HPRT HAM-PD400 Intelligent Deep-Dyeing System
HPRT HAM-PD400 Intelligent Deep-Dyeing System
3D Printers

HPRT HAM-PD400 Intelligent Deep-Dyeing System

HPRT HAM-PD400 intelligent deep-dyeing post-processing equipment for 3d printed parts: Liquid immersion dyeing; request a MAISUI quotation and specification s

  • HPRT HAM-PD400
  • Liquid immersion dyeing
  • 2000 x 1210 x 2000 mm
  • Φ400 x 390 mm
Browse the range
MAISUI product teamUpdated 22 Nov 2026Manufacturer product page, 2026

The HPRT HAM-PD400 is a intelligent deep-dyeing post-processing system with Φ400 x 390 mm processing volume, liquid immersion dyeing and 10-20 min per batch, built for colouring 3D printed polymer parts.

Key facts at a glance

Category
3D printers and additive manufacturing
Brand / model
HPRT HAM-PD400
Technology
Liquid immersion dyeing
Footprint
2000 x 1210 x 2000 mm
Effective volume
Φ400 x 390 mm
Batch capacity
One SJF-P380 build
Cycle time
10-20 min
Weight
500 kg

What it is

The HPRT HAM-PD400 is a intelligent deep-dyeing post-processing system. It works with Dye bath; compatible with SJF, SLS, SAF, MJF and HSS printed parts and produces parts within Φ400 x 390 mm processing volume. The machine is designed for colouring 3D printed polymer parts and fits into a workshop where parts are designed digitally and produced on demand.

Compared with subtractive machining, additive manufacturing builds the part layer by layer, so internal channels, lattices and short-run geometries that would need extra tooling can be produced directly from a file.

How it works

  1. Export the part as STL or the native job file and slice it for the machine.
  2. Prepare the machine: load material, check the build plate or powder bed and confirm the job.
  3. Run the build; the machine reports progress and any faults.
  4. Remove the finished part and clean off support, powder or resin.
  5. Carry out post-processing: Used after powder removal to give parts a uniform colour through the section.
  6. Inspect the part against the drawing and log the build parameters.

Materials and consumables

Dye bath; compatible with SJF, SLS, SAF, MJF and HSS printed parts. Consumable quality and storage affect the result: keep filament dry, keep resin out of UV light and handle powder in a controlled area. HPRT specifies the material range for the machine; test the actual material before production.

Software and workflow

Parts are prepared in a slicer or the printer software and sent to the machine via memory card or network, depending on the model. For production use, keep a job library with versioned files and record which machine and material produced each part, so the same result can be repeated.

Key capabilities

  • Technology. Liquid immersion dyeing.
  • Footprint. 2000 x 1210 x 2000 mm.
  • Effective volume. Φ400 x 390 mm.
  • Batch capacity. One SJF-P380 build.
  • Cycle time. 10-20 min.
  • Weight. 500 kg.
  • Max. temperature. 115 °C.
  • Air requirement. 7 bar; max. 1.5 m³ per cycle.

Where it fits

  • colouring 3D printed polymer parts
  • consumer products and prototypes
  • small-batch coloured production

Typical environment: a design office, workshop or production cell where parts are made in small batches and design changes are frequent.

HPRT 3D printing range at a glance

Model Type Build / process size Typical use
SJF-P380 Industrial powder-bed (SJF) 380 x 280 x 380 mm Functional parts and small-batch production
HAM-PC800 Powder cleaning 57 L per batch Post-processing after printing
HAM-PD400 Deep dyeing Φ400 x 390 mm Colouring 3D printed parts
F210 Desktop FDM 220 x 220 x 250 mm Prototypes, jigs, teaching
FDM-F110 Entry desktop FDM 100 x 100 x 85 mm Education and small models
LCD-L228 LCD resin 228 x 121 x 300 mm High-detail prototypes and models
LCD-L298 8K LCD elastomer 294 x 160 x 400 mm Elastomer parts, footwear, robotics

Technical specifications

Technology Liquid immersion dyeing
Footprint 2000 x 1210 x 2000 mm
Effective volume Φ400 x 390 mm
Batch capacity One SJF-P380 build
Cycle time 10-20 min
Weight 500 kg
Max. temperature 115 °C
Air requirement 7 bar; max. 1.5 m³ per cycle

Site requirements and installation

Plan power, compressed air (if required by the model), ventilation and floor space before delivery. Powder and resin processes need controlled handling and waste. Confirm the exact services with MAISUI during project scoping.

Selection checklist

  • What part size, material and accuracy are required?
  • Is the part for prototyping, tooling or end-use production?
  • What monthly volume and build frequency should the machine handle?
  • Which post-processing steps are needed, and who performs them?
  • What power, air and ventilation are available on site?
  • Who will operate, maintain and service the machine?

Maintenance and service

Follow the manufacturer service schedule for the hot end, optics, powder handling or resin vat, and keep spare consumables on site. MAISUI provides installation support, training and after-sales service.

Frequently asked questions

What is the HAM-PD400?

An intelligent deep-dyeing system for 3D printed polymer parts.

Which printing processes are supported?

Parts from SJF, SLS, SAF, MJF and HSS processes.

What is the processing volume?

Φ400 x 390 mm, one SJF-P380 build per batch.

How long is a cycle?

10 to 20 minutes.

What temperature does it reach?

Up to 115 °C.

What air supply is needed?

7 bar, up to 1.5 m³ per cycle.

Does dyeing affect dimensions?

Dyeing is a surface and near-surface process; check tolerance requirements on your part.

What maintenance is required?

Dye bath maintenance and filtration per the manufacturer schedule.

Can it run next to the printer?

Yes, it is designed as a post-processing unit for a 3D printing line.

Can I get a quotation?

Send part size and volume through the contact form.