Guangzhou, China · Smart Manufacturing Solutions [email protected] / +86 20 3337 2844
Home/Products/3D Printers/HPRT FDM-F110 Desktop FDM 3D Printer
HPRT FDM-F110 Desktop FDM 3D Printer
3D Printers

HPRT FDM-F110 Desktop FDM 3D Printer

HPRT FDM-F110 entry-level desktop fdm 3d printer: 100 x 100 x 85 mm; request a MAISUI quotation and specification sheet.

  • HPRT FDM-F110
  • 100 x 100 x 85 mm
  • ABS + PC
  • ABS + PC, acrylic
Browse the range
MAISUI product teamUpdated 22 Nov 2026Manufacturer product page, 2026

The HPRT FDM-F110 is a entry-level desktop FDM 3D printer with 100 x 100 x 85 mm, per slicer profile and max. 80 mm/s head speed, built for education and classroom projects.

Key facts at a glance

Category
3D printers and additive manufacturing
Brand / model
HPRT FDM-F110
Build size
100 x 100 x 85 mm
Frame
ABS + PC
Shell
ABS + PC, acrylic
Heating end
All-metal
Max. nozzle temperature
220 °C
Nozzle diameter
0.4 mm

What it is

The HPRT FDM-F110 is a entry-level desktop FDM 3D printer. It works with 1.75 mm filament; all-metal hot end up to 220 °C and produces parts within 100 x 100 x 85 mm. The machine is designed for education and classroom projects and fits into a workshop where parts are designed digitally and produced on demand.

Compared with subtractive machining, additive manufacturing builds the part layer by layer, so internal channels, lattices and short-run geometries that would need extra tooling can be produced directly from a file.

How it works

  1. Export the part as STL or the native job file and slice it for the machine.
  2. Prepare the machine: load material, check the build plate or powder bed and confirm the job.
  3. Run the build; the machine reports progress and any faults.
  4. Remove the finished part and clean off support, powder or resin.
  5. Carry out post-processing: Parts are ready after removal from the build plate; light cleanup may be needed.
  6. Inspect the part against the drawing and log the build parameters.

Materials and consumables

1.75 mm filament; all-metal hot end up to 220 °C. Consumable quality and storage affect the result: keep filament dry, keep resin out of UV light and handle powder in a controlled area. HPRT specifies the material range for the machine; test the actual material before production.

Software and workflow

Parts are prepared in a slicer or the printer software and sent to the machine via memory card or network, depending on the model. For production use, keep a job library with versioned files and record which machine and material produced each part, so the same result can be repeated.

Key capabilities

  • Build size. 100 x 100 x 85 mm.
  • Frame. ABS + PC.
  • Shell. ABS + PC, acrylic.
  • Heating end. All-metal.
  • Max. nozzle temperature. 220 °C.
  • Nozzle diameter. 0.4 mm.
  • Filament diameter. 1.75 mm.
  • Build plate. PA10T.
  • Max. head speed. 80 mm/s.

Where it fits

  • education and classroom projects
  • home prototyping
  • small parts and models

Typical environment: a design office, workshop or production cell where parts are made in small batches and design changes are frequent.

HPRT 3D printing range at a glance

Model Type Build / process size Typical use
SJF-P380 Industrial powder-bed (SJF) 380 x 280 x 380 mm Functional parts and small-batch production
HAM-PC800 Powder cleaning 57 L per batch Post-processing after printing
HAM-PD400 Deep dyeing Φ400 x 390 mm Colouring 3D printed parts
F210 Desktop FDM 220 x 220 x 250 mm Prototypes, jigs, teaching
FDM-F110 Entry desktop FDM 100 x 100 x 85 mm Education and small models
LCD-L228 LCD resin 228 x 121 x 300 mm High-detail prototypes and models
LCD-L298 8K LCD elastomer 294 x 160 x 400 mm Elastomer parts, footwear, robotics

Technical specifications

Build size 100 x 100 x 85 mm
Frame ABS + PC
Shell ABS + PC, acrylic
Heating end All-metal
Max. nozzle temperature 220 °C
Nozzle diameter 0.4 mm
Filament diameter 1.75 mm
Build plate PA10T
Max. head speed 80 mm/s

Site requirements and installation

Plan power, compressed air (if required by the model), ventilation and floor space before delivery. Powder and resin processes need controlled handling and waste. Confirm the exact services with MAISUI during project scoping.

Selection checklist

  • What part size, material and accuracy are required?
  • Is the part for prototyping, tooling or end-use production?
  • What monthly volume and build frequency should the machine handle?
  • Which post-processing steps are needed, and who performs them?
  • What power, air and ventilation are available on site?
  • Who will operate, maintain and service the machine?

Maintenance and service

Follow the manufacturer service schedule for the hot end, optics, powder handling or resin vat, and keep spare consumables on site. MAISUI provides installation support, training and after-sales service.

Frequently asked questions

What is the FDM-F110?

A compact desktop FDM printer with a 100 x 100 x 85 mm build volume.

Who is it for?

Education and home use, with out-of-box printing.

What is the maximum nozzle temperature?

220 °C.

What filament size does it use?

1.75 mm.

What is the nozzle diameter?

0.4 mm.

What is the build plate material?

PA10T.

How fast can the head move?

Up to 80 mm/s.

Is it enclosed?

It has an ABS+PC frame and acrylic shell.

What can it make?

Teaching models, small prototypes and household parts.

Can I get a quotation?

Send your application through the contact form.