The HPRT F210 is a desktop FDM 3D printer with 220 x 220 x 250 mm, 0.1-0.4 mm and ≤180 mm/s (normal 30-60 mm/s), built for prototypes and design verification.
Key facts at a glance
- Category
- 3D printers and additive manufacturing
- Brand / model
- HPRT F210
- Printing method
- FDM
- Build size
- 220 x 220 x 250 mm
- Print speed
- ≤180 mm/s; normal 30-60 mm/s
- Layer thickness
- 0.1-0.4 mm
- Print accuracy
- ±0.2 mm
- Nozzle
- 0.4 mm, up to 260 °C
What it is
The HPRT F210 is a desktop FDM 3D printer. It works with 1.75 mm PLA filament and produces parts within 220 x 220 x 250 mm. The machine is designed for prototypes and design verification and fits into a workshop where parts are designed digitally and produced on demand.
Compared with subtractive machining, additive manufacturing builds the part layer by layer, so internal channels, lattices and short-run geometries that would need extra tooling can be produced directly from a file.
How it works
- Export the part as STL or the native job file and slice it for the machine.
- Prepare the machine: load material, check the build plate or powder bed and confirm the job.
- Run the build; the machine reports progress and any faults.
- Remove the finished part and clean off support, powder or resin.
- Carry out post-processing: Parts can be cleaned up, assembled or used as functional prototypes.
- Inspect the part against the drawing and log the build parameters.
Materials and consumables
1.75 mm PLA filament. Consumable quality and storage affect the result: keep filament dry, keep resin out of UV light and handle powder in a controlled area. HPRT specifies the material range for the machine; test the actual material before production.
Software and workflow
Parts are prepared in a slicer or the printer software and sent to the machine via memory card or network, depending on the model. For production use, keep a job library with versioned files and record which machine and material produced each part, so the same result can be repeated.
Key capabilities
- Printing method. FDM.
- Build size. 220 x 220 x 250 mm.
- Print speed. ≤180 mm/s; normal 30-60 mm/s.
- Layer thickness. 0.1-0.4 mm.
- Print accuracy. ±0.2 mm.
- Nozzle. 0.4 mm, up to 260 °C.
- Filament. 1.75 mm PLA.
- Supported formats. STL / OBJ.
- Operation. Memory card offline or online printing.
Where it fits
- prototypes and design verification
- jigs, fixtures and brackets
- teaching and engineering labs
Typical environment: a design office, workshop or production cell where parts are made in small batches and design changes are frequent.
HPRT 3D printing range at a glance
| Model | Type | Build / process size | Typical use |
|---|---|---|---|
| SJF-P380 | Industrial powder-bed (SJF) | 380 x 280 x 380 mm | Functional parts and small-batch production |
| HAM-PC800 | Powder cleaning | 57 L per batch | Post-processing after printing |
| HAM-PD400 | Deep dyeing | Φ400 x 390 mm | Colouring 3D printed parts |
| F210 | Desktop FDM | 220 x 220 x 250 mm | Prototypes, jigs, teaching |
| FDM-F110 | Entry desktop FDM | 100 x 100 x 85 mm | Education and small models |
| LCD-L228 | LCD resin | 228 x 121 x 300 mm | High-detail prototypes and models |
| LCD-L298 | 8K LCD elastomer | 294 x 160 x 400 mm | Elastomer parts, footwear, robotics |
Technical specifications
| Printing method | FDM |
|---|---|
| Build size | 220 x 220 x 250 mm |
| Print speed | ≤180 mm/s; normal 30-60 mm/s |
| Layer thickness | 0.1-0.4 mm |
| Print accuracy | ±0.2 mm |
| Nozzle | 0.4 mm, up to 260 °C |
| Filament | 1.75 mm PLA |
| Supported formats | STL / OBJ |
| Operation | Memory card offline or online printing |
Site requirements and installation
Plan power, compressed air (if required by the model), ventilation and floor space before delivery. Powder and resin processes need controlled handling and waste. Confirm the exact services with MAISUI during project scoping.
Selection checklist
- What part size, material and accuracy are required?
- Is the part for prototyping, tooling or end-use production?
- What monthly volume and build frequency should the machine handle?
- Which post-processing steps are needed, and who performs them?
- What power, air and ventilation are available on site?
- Who will operate, maintain and service the machine?
Maintenance and service
Follow the manufacturer service schedule for the hot end, optics, powder handling or resin vat, and keep spare consumables on site. MAISUI provides installation support, training and after-sales service.
Frequently asked questions
What is the F210?
A desktop FDM 3D printer with a 220 x 220 x 250 mm build volume.
What accuracy does it achieve?
±0.2 mm.
What layer heights can it print?
0.1 to 0.4 mm.
What filament does it use?
1.75 mm PLA.
How fast can it print?
Up to 180 mm/s, with normal quality at 30-60 mm/s.
What nozzle does it have?
0.4 mm, up to 260 °C.
Which file formats are supported?
STL and OBJ.
Does it need a PC connection?
It can print from a memory card offline or online.
What can it make?
Prototypes, jigs and fixtures, and teaching models.
Can I get a quotation?
Send your application through the contact form.