The Dikai D118i is an electric, airless intelligent thermal transfer overprinter for film and labels, with up to 120 prints per minute and a 7-inch touchscreen, positioned as a replacement for traditional hot-stamp and ribbon coders.
Key facts at a glance
- Category
- Thermal transfer overprinter (TTO)
- Brand / model
- Dikai D118i
- Model
- D118i
- Print rate
- Up to 120 prints/min
- Display
- 7-inch touchscreen
- File storage
- Up to 2,000 files
- Min. gap between prints
- 0.5 mm
- Air supply
- Not required (electric intermittent structure)
What it is
The Dikai D118i is an electric, airless intelligent thermal transfer overprinter for film and labels, with up to 120 prints per minute and a 7-inch touchscreen, positioned as a replacement for traditional hot-stamp and ribbon coders. It prints variable data onto flexible film, labels and paper without pre-printed panels, so dates, batch codes and 2D codes can change every pack.
How it works
- Mount the printhead on the packaging machine at the coding position.
- Load the ribbon cassette or spool and set the print gap.
- Edit the message, date rules and code content on the touchscreen or from the line system.
- Print test packs and check code position and grade.
- Run production, monitor ribbon use and clean the printhead on schedule.
Key capabilities
- No compressed air. Patented intermittent electric structure works without an air supply.
- 120 ppm print rate. Suits medium and low-speed packaging lines.
- 0.5 mm message gap. Low ribbon consumption and accurate placement.
- 7-inch touchscreen. Edit and switch files on the machine, no PC needed.
- 2,000 stored files. Fast job changeover on the line.
- TTO ribbon compatibility. Prints are oil, boil, rub and freeze resistant with matched ribbons.
- Hot-stamp replacement. Prints on film and labels without heating or type changes.
- Compact body. Fits small vertical packaging machines.
Where it fits
Used on pouch, sachet, flow-wrap, paper and label lines where the code changes per pack.
Technical specifications
| Model | D118i |
|---|---|
| Print rate | Up to 120 prints/min |
| Display | 7-inch touchscreen |
| File storage | Up to 2,000 files |
| Min. gap between prints | 0.5 mm |
| Air supply | Not required (electric intermittent structure) |
| Ribbon | Compatible TTO ribbons |
| Coding | Dates, times, text, variables and graphics |
| Replacement | Direct replacement for traditional hot-stamp/ribbon coders |
Selection checklist
- Which film and code size are used?
- What line speed must be matched?
- Intermittent or continuous motion?
- Which ribbon grade suits the material?
- Does the line have compressed air, or is an airless unit required?
- Who installs and services the coder?
Maintenance and service
Keep the printhead and ribbon path clean, use the specified ribbon and replace worn printheads before code quality drops. MAISUI supplies matched TTO ribbons, spare parts and installation support.
Frequently asked questions
What is the Dikai D118i?
It is an airless electric TTO printer with up to 120 ppm and a 7-inch touchscreen.
What resolution does it print?
300 dpi where a 300 dpi head is fitted; confirm the head option when ordering.
Which materials can it code?
Flexible films, laminates, labels and paper used on packaging lines.
Does it need compressed air?
Some Dikai models need compressed air; the D118i and D158i use electric structures without air.
Which ribbon does it use?
A TTO ribbon matched to the printhead width and material; MAISUI supplies matched ribbons.
Can it replace a hot-stamp coder?
Dikai D-series printers are designed as drop-in replacements on many packaging machines; check mounting and line interface.
How are codes edited?
On the touchscreen, or from the line system through the network interface.
Can I get a datasheet and quotation?
Send film, code and line details through the contact form; MAISUI replies with a quotation and specification sheet.