Guangzhou, China · Smart Manufacturing Solutions [email protected] / +86 20 3337 2844
Home/Products/TTO Printers/Dikai D06S Thermal Transfer Overprinter
Dikai D06S thermal transfer overprinter
TTO Printers

Dikai D06S Thermal Transfer Overprinter

Dikai D06S thermal transfer overprinter: D06S-32 / D06S-53, 32 mm or 53 mm, 300 dpi, matched TTO ribbons and quotation from MAISUI.

  • Dikai D06S
  • D06S-32 / D06S-53
  • 32 mm or 53 mm, 300 dpi
  • 32/53 x 75 mm
Browse the range
MAISUI product teamUpdated 22 Nov 2026Manufacturer product page, 2026

The Dikai D06S is an intelligent 300 dpi thermal transfer overprinter with 32 mm or 53 mm printheads, up to 350 prints per minute and a 600 m ribbon, built for flexible packaging lines.

Key facts at a glance

Category
Thermal transfer overprinter (TTO)
Brand / model
Dikai D06S
Models
D06S-32 / D06S-53
Print head
32 mm or 53 mm, 300 dpi
Print area (intermittent)
32/53 x 75 mm
Print area (continuous)
32/53 x 150 mm
Max. ribbon length
600 m
Ribbon width
22-33 mm (32 mm head); 25-55 mm (53 mm head)

What it is

The Dikai D06S is an intelligent 300 dpi thermal transfer overprinter with 32 mm or 53 mm printheads, up to 350 prints per minute and a 600 m ribbon, built for flexible packaging lines. It prints variable data onto flexible film, labels and paper without pre-printed panels, so dates, batch codes and 2D codes can change every pack.

How it works

  1. Mount the printhead on the packaging machine at the coding position.
  2. Load the ribbon cassette or spool and set the print gap.
  3. Edit the message, date rules and code content on the touchscreen or from the line system.
  4. Print test packs and check code position and grade.
  5. Run production, monitor ribbon use and clean the printhead on schedule.

Key capabilities

  • 350 ppm print rate. Rapid coding for high-volume flexible packaging.
  • 0-48 m/min line speed. Continuous-mode speed range from standstill to 48 m/min.
  • 10.1-inch touchscreen. 1280 x 800 colour screen for on-machine file editing.
  • Printhead dead-dot detection. Checks printhead health on the line before quality drops.
  • Vision reject integration. Built-in NG reject control without an extra controller.
  • 600 m ribbon. Fewer ribbon changes and less downtime.
  • 32 / 53 mm heads. One platform for different code widths and ribbon widths.
  • Wi-Fi remote support. Remote setup and fault diagnosis over Wi-Fi.

Where it fits

FoodPharmaceuticalDaily chemicalsSeed packetsTissue and paper

Used on pouch, sachet, flow-wrap, paper and label lines where the code changes per pack.

Technical specifications

Models D06S-32 / D06S-53
Print head 32 mm or 53 mm, 300 dpi
Print area (intermittent) 32/53 x 75 mm
Print area (continuous) 32/53 x 150 mm
Max. ribbon length 600 m
Ribbon width 22-33 mm (32 mm head); 25-55 mm (53 mm head)
Print speed 0-48 m/min continuous; 6-40 m/min intermittent
Print rate Up to 350 prints/min
Interface USB, Ethernet, RS232, Wi-Fi
Power AC 100-240 V, 50/60 Hz; 240 W
Air supply 0.6 MPa max, dry and clean
Working temperature 0-40 °C
Humidity 10-90% non-condensing
Weight Print unit 7.35 kg; screen 0.6 kg

Selection checklist

  • Which film and code size are used?
  • What line speed must be matched?
  • Intermittent or continuous motion?
  • Which ribbon grade suits the material?
  • Does the line have compressed air, or is an airless unit required?
  • Who installs and services the coder?

Maintenance and service

Keep the printhead and ribbon path clean, use the specified ribbon and replace worn printheads before code quality drops. MAISUI supplies matched TTO ribbons, spare parts and installation support.

Frequently asked questions

What is the Dikai D06S?

It is a 300 dpi intelligent TTO printer with 32/53 mm heads, up to 350 ppm and 600 m ribbon capacity.

What resolution does it print?

300 dpi where a 300 dpi head is fitted; confirm the head option when ordering.

Which materials can it code?

Flexible films, laminates, labels and paper used on packaging lines.

Does it need compressed air?

Some Dikai models need compressed air; the D118i and D158i use electric structures without air.

Which ribbon does it use?

A TTO ribbon matched to the printhead width and material; MAISUI supplies matched ribbons.

Can it replace a hot-stamp coder?

Dikai D-series printers are designed as drop-in replacements on many packaging machines; check mounting and line interface.

How are codes edited?

On the touchscreen, or from the line system through the network interface.

Can I get a datasheet and quotation?

Send film, code and line details through the contact form; MAISUI replies with a quotation and specification sheet.