Guangzhou, China · Smart Manufacturing Solutions [email protected] / +86 20 3337 2844
Home/Products/Thermal Transfer Printers/JT452 / JT453 / JT456 Thermal Transfer Printers
JT452, JT453 and JT456 desktop thermal transfer printer, front view
Thermal Transfer Printers

JT452 / JT453 / JT456 Thermal Transfer Printers

MAISUI JT series 4-inch desktop thermal transfer printers: JT452 at 203 dpi, JT453 at 300 dpi and JT456 at 600 dpi, supplied with matched ribbons and labels.

  • Three desktop 4-inch models: JT452 203 dpi, JT453 300 dpi, JT456 600 dpi
  • Thermal transfer with ribbon plus direct thermal mode
  • Media widths from 25 to 115 mm for labels, tags and tickets
  • Matched wax, wax-resin and resin ribbons supplied by MAISUI
Browse the range
MAISUI product teamUpdated 22 Nov 2026

MAISUI’s JT series brings three 4-inch desktop thermal transfer printers into one range: the JT452 at 203 dpi for general labelling, the JT453 at 300 dpi for dense text and small barcodes, and the JT456 at 600 dpi for high-detail work. All three share the same compact platform, print with ribbon or direct thermal media, and are supplied with matched ribbons and labels from Guangzhou.

Key facts at a glance

Category
4-inch desktop thermal transfer printer
Models
JT452, JT453, JT456
Resolution
203 / 300 / 600 dpi, model dependent
Maximum print width
108 mm (JT452); 104 mm (JT453); JT456 confirmed per configuration
Print modes
Thermal transfer with ribbon; direct thermal
Interface
USB standard; serial, Ethernet, Bluetooth and Wi-Fi optional

Which JT model fits which job

The three models share the same 4-inch desktop chassis and media path. Resolution is the main difference: choose the model by the smallest text, barcode or 2D code you need to print, then confirm print width and speed for your label.

Model Resolution Max print speed Max print width Typical fit
JT452 203 dpi (8 dots/mm) 200 mm/s 108 mm General labels, carton and shelf labels, shipping labels, asset tags.
JT453 300 dpi (305 dots/inch) 150 mm/s 104 mm Dense labels, small text and barcodes, wash-care labels and retail tags.
JT456 600 dpi To be confirmed To be confirmed Micro text, small QR and DataMatrix codes, high-detail film labels.

JT456 note: the 600 dpi resolution is confirmed. Its maximum print width and print speed are not published in the current series specification, so MAISUI confirms both for your configuration before quotation.

What the JT series is

The JT series is a compact 4-inch desktop platform for manufacturers, warehouses, retailers and apparel suppliers that print their own labels. It takes roll-fed labels, tags and wash-care stock, and can print either with a thermal transfer ribbon or in direct thermal mode without a ribbon. The chassis measures 273 x 220 x 177 mm and weighs 2.0 kg, so it fits a packing bench, warehouse desk or retail counter.

USB is standard. Serial, Ethernet, Bluetooth and Wi-Fi are available as options when the printer has to sit on a network or print from a mobile device. A full-cut cutter and an external media stand are also available for higher-volume work.

How it works

  1. Load a 4-inch roll of labels, tags or wash-care stock and fit a wax, wax-resin or resin ribbon.
  2. Set the media and ribbon path, close the cover and calibrate the sensor for gap, black-mark or continuous stock.
  3. Create the label template in your labelling software, or send the print job from ERP, WMS or a production system.
  4. Print a test label and check barcode grade, text size and print darkness.
  5. Run the batch and replace ribbon and media as they run out.

Where it fits

Carton and pallet labelsProduct and batch labelsShipping labelsWarehouse shelf labelsAsset and equipment tagsRetail price and hang tagsWash-care labelsTickets and passes

In dispatch, the JT series prints shipping and pallet labels. On production lines it prints product, batch and lot labels. In retail and apparel it produces price tags, hang tags and wash-care labels; in the warehouse it covers shelf, location and asset labels.

Technical specifications

Print technology Thermal transfer (ribbon) and direct thermal
Print resolution JT452: 203 dpi (8 dots/mm); JT453: 300 dpi (305 dots/inch, 11.8 dots/mm); JT456: 600 dpi
Maximum print width JT452: 108 mm; JT453: 104 mm; JT456: confirmed per configuration
Maximum print speed JT452: 200 mm/s; JT453: 150 mm/s; JT456: confirmed per configuration
Maximum print length 3048 mm (JT452 and JT453); JT456 confirmed per configuration
Media types Continuous, gap, black-mark, fan-fold and punched stock; thermal paper, coated paper, synthetic stock, self-adhesive labels, hang tags, wash-care labels and tickets
Media size Width 25-115 mm; thickness 0.08-0.35 mm; roll outside diameter up to 127 mm; core 25.4 mm (1 inch), with 0.5-inch and 3-inch cores optional
Ribbon Wax, enhanced wax, wax-resin and resin; width 25.4-110 mm; up to 300 m on a 1-inch core
Interface USB standard; serial, Ethernet, Bluetooth and Wi-Fi optional
Memory 128 MB RAM / 16 MB flash
Dimensions and weight 273 x 220 x 177 mm; 2.0 kg net
Power AC 100-240 V, 50/60 Hz; DC 24 V 2.5 A, 60 W
Options Full-cut cutter; external media stand for rolls up to 214 mm OD with a 3-inch core

JT456 is built on the same 4-inch desktop platform. Confirm its media handling and options with MAISUI for the configuration you order.

Ribbons and labels matched to the printer

Print durability depends as much on the ribbon and label combination as on the printer. As a rule of thumb: wax for coated paper labels and general carton work, wax-resin for synthetic and semi-gloss materials, and resin for PET, PVC, PP or PE film labels that must survive heat, chemicals or abrasion. MAISUI supplies all three ribbon families plus paper, synthetic and security labels, and can pre-test the combination on your material.

Selection checklist

  • Which resolution fits the content: 203 dpi for general labels, 300 dpi for dense text, 600 dpi for micro text and small 2D codes?
  • What print width does the label need? The JT452 prints up to 108 mm and the JT453 up to 104 mm; confirm JT456 for your configuration.
  • Will the label be paper, synthetic, wash-care or tag stock, and must it survive heat, abrasion or chemicals?
  • What is the peak label volume per shift, and does the model’s speed cover it?
  • Which connection does the line need: USB, serial, Ethernet, Bluetooth or Wi-Fi?
  • Do you need a full-cut cutter or an external media stand for larger rolls?
  • Who will supply and test ribbons and labels to avoid print-quality surprises?

Maintenance and consumables

Print quality depends on the printhead, platen roller and the ribbon-to-label match. Clean the printhead at the interval your dust level requires, replace worn platens, and keep a spare printhead and ribbon stock for critical lines. MAISUI supplies ribbons and labels tested with the JT series so the combination is predictable.

Frequently asked questions

Which JT model should I choose?

Start with resolution. The JT452 at 203 dpi covers general labels, carton labels and shipping labels at 200 mm/s. The JT453 at 300 dpi suits denser labels, small text and barcodes at 150 mm/s. The JT456 at 600 dpi is for micro text and small 2D codes. Confirm print width and speed for your label before ordering.

What resolution do I need?

203 dpi is enough for large text and standard barcodes on carton, pallet and shipping labels. 300 dpi suits labels with smaller text or more data, including wash-care labels. 600 dpi is used for very small text, micro labels and small QR or DataMatrix codes.

Thermal transfer or direct thermal?

Thermal transfer uses a ribbon and produces labels that resist heat, abrasion and chemicals, so it suits durable product, asset and wash-care labels. Direct thermal needs no ribbon but the image can fade with heat, sunlight or friction, so it suits short-life labels such as shipping and temporary tags.

Which ribbon should I use?

Wax for coated paper labels and general carton work, wax-resin for synthetic and semi-gloss materials, and resin for film labels that must survive heat, chemicals or abrasion. MAISUI supplies all three ribbon families and can test the combination on your material.

Can it print labels, hang tags and wash-care labels?

Yes. The JT series handles roll-fed labels, hang tags, wash-care labels and tickets within a media width of 25-115 mm and a thickness of 0.08-0.35 mm. Test the exact material and ribbon combination before production, especially for textile and synthetic stock.

What media size does the printer accept?

Media width is 25-115 mm and thickness is 0.08-0.35 mm. Roll outside diameter is up to 127 mm with a 1-inch core as standard, and 0.5-inch or 3-inch cores are available as options. Maximum print length is 3048 mm on the JT452 and JT453; confirm JT456 with MAISUI for your configuration.

Which interfaces are available?

USB is standard. Serial, Ethernet, Bluetooth and Wi-Fi are available as options, so the printer can connect to a PC, a warehouse network or a mobile device depending on the configuration ordered.

What are the JT456 print width and speed?

The JT456 is confirmed at 600 dpi on the same 4-inch desktop platform. The current series specification does not publish its maximum print width or print speed, so MAISUI confirms both for your label and configuration before quotation.

Do you supply ribbons, labels and spare parts?

Yes. MAISUI supplies wax, wax-resin and resin ribbons plus paper, synthetic and security labels, and keeps common spare parts for the JT series. Ribbons and labels can be tested with the printer before production.

Can I get a quotation for this product?

Send the model, label size, material and estimated quantity. MAISUI replies with a matched quotation within 24 hours on business days, and confirms lead time together with the quotation.