The Markem-Imaje 9330 is a low to medium duty continuous inkjet coder built for lines that change packaging and production volume. It prints up to 5 lines at up to 4.4 m/s with a 71 dpi G printhead, characters from 1.8 to 8.6 mm, and up to 2083 characters per second. The M6′ ink circuit runs for more than 8000 hours and is changed in under six minutes; the IP55 cabinet needs no plant air.
Key facts at a glance
- Category
- Continuous inkjet (CIJ) small-character coder
- Model
- Markem-Imaje 9330
- Printhead
- Mono-jet G head, 71 dpi
- Lines and speed
- Up to 5 lines; up to 4.4 m/s
- Throughput
- Up to 2083 characters per second
- Character height
- 1.8-8.6 mm; font height 5-24 dots
- Ink circuit
- M6′, over 8000 hours; 2 sealed intelligent cartridges of 0.75 L
- Interface
- Colour touch screen, 31 languages, Ethernet and RS-232
What it is
The 9330 is Markem-Imaje’s answer to the coder that has to grow with the plant. It keeps the compact stainless steel cabinet of the 9029 but adds a fifth print line, a colour touch screen, a 1000-message library and Ethernet connectivity, so the same machine can start on one product and later run several packaging formats without a hardware change.
Three Markem-Imaje technologies are central to the design: Intelli’Jet, which adjusts ink and printer variables to keep drop placement and code quality consistent; Intelli’Swap, which reduces the mechanics to swappable modules; and Intelli’Ink, the ink portfolio that covers different package materials. The result is a coder that is simple to run but flexible enough for a producer whose line is still changing.
How it works
- Mount the cabinet beside the conveyor on a stand, table or wall bracket, and set the printhead at the coding position with the 3 m umbilical.
- Load the two 0.75 L sealed intelligent cartridges; the smart consumable system requires no set-up.
- Create the message on the colour touch screen: up to 5 lines, mixed heights, logos, 1D or 2D codes, date and batch fields.
- Connect the photocell, encoder and alarm, and set the print trigger and line speed.
- Start production. Intelli’Jet and Jet Speed Control keep the code consistent as line conditions change; the automatic cleaning system prepares the printhead at each start-up.
Key capabilities
- Five lines, 2083 characters per second. Enough for multi-field codes on fast packaging lines.
- Maximum speed by layout. Up to 4.4 m/s; for 7-dot characters the documented maximum is 1.01 m/s with 3 lines and 0.60 m/s with 4 lines at a 0.36 mm drop pitch.
- 1000-message library. Store every product and language combination on the coder.
- Colour touch screen. On-screen output of on/off state, consumable level, print counter, help and maintenance information.
- Intelli’Swap M6′ module. Ink circuit changed in under six minutes without spillage or waste.
- Up to 50 % less additive. Latest-generation hydraulic system cuts additive consumption compared with competitor models in the same category at 20 °C.
- MEK-free ink option. Standard-priced MEK-free ink avoids import paperwork and improves operator safety.
- Connectivity. Ethernet and RS-232 standard, with quick connect/disconnect for photocell, encoder, alarm and I/O.
Where it fits
The 9330 suits producers whose packaging mix changes: a dairy that moves between cups, cartons and pouches, a snack producer adding formats, or a contract packer that needs one coder to handle many products. Intelli’Ink covers porous and non-porous materials, and the coder can be connected to CoLOS for central code management when several printers run on the same site.
Technical specifications
| Print technology | Continuous inkjet, mono-jet G printhead |
|---|---|
| Print resolution | 71 dpi |
| Print lines | Up to 5 lines |
| Print speed | Up to 4.4 m/s |
| Maximum speed, 7-dot characters | 0.60 m/s at 4 lines (0.36 mm drop pitch); 1.01 m/s at 3 lines |
| Characters per second | Up to 2083 |
| Font height | 5 to 24 dots |
| Character height | 1.8 to 8.6 mm |
| Character sets | Latin, Arabic, Cyrillic, Greek, Japanese, Chinese, Hebrew, Korean |
| Message library | Up to 1000 messages |
| Operator interface | Colour touch screen; on/off, consumable level, print counter, help and maintenance information; 31 languages |
| Ink system | M6′ ink circuit; 2 sealed intelligent cartridges of 0.75 L |
| Ink circuit life | Over 8000 hours of production |
| Connectivity | Ethernet and RS-232 |
| Accessory connections | Quick connect/disconnect for photocell, encoder, alarm, I/O |
| Printhead cleaning | Automatic cleaning system at start-up |
| Umbilical | 3 m flexible cable |
| Cabinet | Stainless steel |
| Protection rating | IP55 |
| Plant air | Not required; pressurisation kits optional |
| Operating temperature | 5 to 40 °C, depending on ink used |
| Humidity | 0 to 90 % non-condensing |
| Power supply | 100-120 V or 200-240 V with automatic switching; 50/60 Hz; 34 W |
| Weight | 18.5 kg |
Inks and cartridges
The 9330 uses two 0.75 L intelligent cartridges and the Intelli’Ink portfolio. Markem-Imaje lists high-adhesion inks for difficult substrates, quick-drying MEK-free inks, and a competitively priced MEK-free solution that removes import and compliance paperwork. Intelli’Jet adjusts the printing parameters to the ink that is fitted, so the same coder can move between ink types with a consumable change.
MAISUI matches the ink grade to the substrate and the process, and can supply a test code on your own material before the first order. For multi-line sites, consumable standardisation on one or two ink grades is usually the fastest way to reduce changeover errors.
Selection checklist
- How many print lines and what character height does the code need?
- What is the maximum line speed at the coding point?
- Which substrates and packaging formats run on the line now, and which are planned?
- Do you need 2D codes, and which symbology?
- Will the coder be connected to CoLOS or a line network through Ethernet?
- Is the area washed down, dusty or humid? IP55 and the pressurisation options are the relevant choices.
- How many messages and languages must be stored on the coder?
- What annual production hours should the M6′ service interval be planned against?
Maintenance and service
The 9330 is maintained by the operator: cartridge changes, printhead cleaning and the M6′ module swap in under six minutes. Markem-Imaje recommends a preventive maintenance procedure at 8000 hours, and the coder provides on-screen maintenance information and a programmable shut-down to support the routine.
MAISUI supplies matched inks, spare cartridges and printhead parts, and can connect the coder to a central code management system when the site uses several printers. Consumable and additive consumption should be logged so the service interval and the ink order cycle stay in step with production.
Frequently asked questions
What is the 9330?
The 9330 is a low to medium duty continuous inkjet coder with up to 5 print lines and a colour touch screen. It is designed for producers whose packaging mix and volume are still growing.
How fast can it print?
Up to 4.4 m/s and up to 2083 characters per second. For 7-dot characters the documented maximum is 1.01 m/s with 3 lines and 0.60 m/s with 4 lines at a 0.36 mm drop pitch.
Which codes can it print?
Text, dates, batch and expiry fields, logos, and 1D or 2D codes including 2D code types supported by Intelli'Jet. Confirm the exact symbology you need when ordering.
Does it need compressed air?
No. The 9330 is specified without plant air. A printhead pressurisation kit and an autonomous pressurisation kit are available as options.
Which inks are available?
The Intelli'Ink portfolio: high-adhesion inks for difficult substrates, quick-drying MEK-free inks and a competitively priced MEK-free grade. Ink is supplied in 0.75 L sealed intelligent cartridges.
How long does the ink circuit last?
The M6' circuit is rated for more than 8000 hours of production, with a recommended preventive maintenance procedure at 8000 hours. The module is replaced in under six minutes.
Can it be networked?
Yes. Ethernet and RS-232 are standard, so the coder can be linked to CoLOS or to a line network for central code management.
What is the operating environment?
5 to 40 °C depending on the ink used, and 0 to 90 % relative humidity non-condensing. The cabinet is IP55 stainless steel.
Can I get a quotation for the 9330?
Send the packaging formats, message content, line speed and annual hours. MAISUI replies with a matched quotation, ink recommendation and lead time within 24 hours on business days.