Guangzhou, China · Smart Manufacturing Solutions [email protected] / +86 20 3337 2844
Home/Products/CIJ Printers/Markem-Imaje 9029 Continuous Inkjet Printer
Markem-Imaje 9029 continuous inkjet printer with open cabinet
CIJ Printers

Markem-Imaje 9029 Continuous Inkjet Printer

Low to medium duty CIJ coder: 4 lines at up to 4.4 m/s, 71 dpi, M6 ink circuit rated over 8000 hours, 0.8 L sealed cartridges and IP55 cabinet without plant air.

  • Low to medium duty CIJ coder with up to 4 lines at 4.4 m/s and 71 dpi
  • M6 ink circuit rated for more than 8000 production hours, changed in under six minutes
  • Up to 50 % lower additive consumption than comparable models at 20 °C
  • IP55 stainless steel cabinet, MEK-free ink option and no plant air required
Browse the range
MAISUI product teamUpdated 22 Nov 2026Markem-Imaje 9029 brochure and specification sheet (2023)

The Markem-Imaje 9029 is a low to medium duty continuous inkjet coder built for simple, low-cost operation. A single G printhead prints up to 4 lines at up to 4.4 m/s, characters from 1.8 to 8.7 mm, and the M6′ ink circuit is rated for more than 8000 hours of production and can be changed by the operator in under six minutes. The IP55 stainless steel cabinet needs no plant air.

Key facts at a glance

Category
Continuous inkjet (CIJ) small-character coder
Model
Markem-Imaje 9029
Printhead
Mono-jet G head, 71 dpi
Lines and speed
Up to 4 lines; up to 4.4 m/s
Character height
1.8-8.7 mm; font height 5-24 dots
Ink circuit
M6′, over 8000 hours; 2 sealed intelligent cartridges of 0.8 L
Interface
WYSIWYG backlit blue screen, 31 languages, USB and RS-232
Protection
IP55 stainless steel cabinet; no plant air required

What it is

The 9029 sits between the entry-level 9018 and the higher-throughput 9330. It keeps the same simple cabinet, printhead and operator interface, but adds a fourth print line, a faster print speed and a longer-life M6′ ink circuit. Markem-Imaje positions it for low to medium duty applications where the coder must be easy to install, easy to run and inexpensive to keep running.

Two design details matter for cost of ownership. The latest-generation hydraulic system reduces additive consumption by up to 50 % compared with comparable models operating at 20 °C, and the M6′ module is rated for more than 8000 hours, so the coder spends less time on service and more on production.

How it works

  1. Install the cabinet on a stand, table or wall bracket and position the printhead on the conveyor with the 2 m umbilical.
  2. Fit the two 0.8 L sealed intelligent cartridges; the system requires no set-up and prevents wrong-ink loading.
  3. Create or upload the message through the interface and USB port: dates, batch codes, counters, logos and multi-language text.
  4. Connect the photocell, encoder and alarm to the quick-release connectors and set the print trigger.
  5. Run the line. Jet Speed Control adjusts the ink and printer variables to keep the drop placement and code quality stable, and the automatic cleaning system prepares the jet at each start-up.

Key capabilities

  • Four print lines. Up to 4 lines with characters from 1.8 to 8.7 mm, at up to 4.4 m/s.
  • M6′ circuit over 8000 hours. All-in-one ink circuit with no extra maintenance, changed in under six minutes without spilling.
  • Lower additive consumption. Up to 50 % less additive than comparable models at 20 °C, according to the manufacturer.
  • Automatic printhead cleaning. Clean start-ups after long storage, so seasonal lines restart without a service call.
  • Ink range. Quick-drying MEK-free ink, MEK ink, alcohol-based ink and a thermochromic ink that changes colour through sterilisation.
  • Smart cartridges. 0.8 L sealed cartridges with automatic consumable management and no set-up.
  • IP55 stainless steel. Wash-down cabinet with no plant air requirement.
  • Connectivity. USB and RS-232 standard; Ethernet, 1D/2D barcodes and pressurisation kits as options.

Where it fits

Food and beverageDairy and chilled packsCosmeticsHousehold productsPharmaceutical secondary packsSeasonal productionContract packing

The 9029 suits producers who need a dependable code on one or two lines, and who value a low consumable cost over maximum speed. It handles the same substrate range as the 9018 – flexible packaging, rigid plastic, paper-based containers, liquid cartons and polymers – plus 1D and 2D barcodes when the barcode option is fitted. Its thermochromic ink option is used where the code must show that a sterilisation or pasteurisation step has taken place.

Technical specifications

Print technology Continuous inkjet, mono-jet G printhead
Print resolution 71 dpi
Print lines Up to 4 lines
Print speed Up to 4.4 m/s
Font height 5 to 24 dots
Character height 1.8 to 8.7 mm
Barcodes 1D and 2D (Datamatrix) as an option
Characters Latin, Arabic, Cyrillic, Greek, Japanese, Chinese, Hebrew, Korean
Message library Up to 100 messages
Operator interface Large WYSIWYG backlit blue screen, integrated help, 31 languages
Ink system M6′ ink circuit; 2 sealed intelligent cartridges of 0.8 L
Ink circuit life Over 8000 hours of production
Consumable handling Sealed cartridges, no set-up, automatic management
Connectivity USB and RS-232 standard; Ethernet optional
Printhead cleaning Automatic cleaning system at start-up
Umbilical 2 m flexible cable; 3 m option
Cabinet Stainless steel
Protection rating IP55
Plant air Not required; autonomous pressurisation kit available as an option
Operating temperature 0 to 40 °C, depending on ink used
Humidity 10 to 90 % non-condensing
Power supply 100-120 V or 200-240 V with automatic switching; 50/60 Hz; 34 W
Weight 18.5 kg

Inks and cartridges

The 9029 takes 0.8 L sealed intelligent cartridges. Markem-Imaje lists quick-drying MEK-free and MEK inks, alcohol-based inks, a colour-changing thermochromic ink for sterilisation processes, and high-adhesion inks for difficult substrates. The MEK-free grade is priced as standard ink, which simplifies supply, compliance and safety paperwork compared with solvent inks that require import documentation.

Because the ink circuit is sealed and the cartridges are keyed, a change of ink is a consumable swap. MAISUI recommends confirming the grade against a real sample of the substrate and the process conditions – especially for retort, pasteurisation and chilled distribution – before the first production run.

Selection checklist

  • Do you need four lines, or is a three-line code enough?
  • What is the real line speed at the coding point, including acceleration?
  • Which substrates and which post-treatments apply: pasteurisation, retort, freezing, sterilisation?
  • Do you need 1D or 2D barcodes, and which symbology?
  • Is the ink area subject to wash-down or condensation?
  • Do you need Ethernet for a line network or CoLOS, or is stand-alone operation enough?
  • How many shifts per week, and what production hours per year? This drives the M6′ service interval.
  • Do you need a thermochromic ink for sterilisation verification?

Maintenance and service

Operator maintenance is limited to consumable changes and printhead cleaning. The M6′ ink circuit runs for more than 8000 hours and is replaced as a module in under six minutes, with no additional maintenance required. Markem-Imaje recommends a preventive maintenance procedure at 8000 hours; MAISUI schedules it with the production plan so the line is not stopped mid-season.

Spare cartridges, printhead consumables and service kits are supplied with the coder. For seasonal lines, the automatic cleaning system allows the coder to be stored for weeks and restarted without a service visit, which is one of the main reasons producers choose the 9029 over a lower-cost machine.

Frequently asked questions

What is the 9029?

The 9029 is a low to medium duty continuous inkjet coder from Markem-Imaje. It prints up to 4 lines at up to 4.4 m/s and is designed for producers who need a dependable code at a low cost per code.

How does it differ from the 9018?

The 9029 adds a fourth print line, raises the print speed from 3 m/s to 4.4 m/s, uses 0.8 L cartridges and rates the M6 ink circuit for more than 8000 hours. Its additive consumption is up to 50 % lower than comparable models at 20 °C.

Does it support barcodes?

Yes, 1D and 2D barcodes including Datamatrix are available as an option. The barcode option should be specified with the order because it changes the coder configuration.

What inks are available?

Quick-drying MEK-free and MEK inks, alcohol-based inks, a thermochromic ink for sterilisation processes and high-adhesion inks. The MEK-free grade is priced as standard ink to simplify supply and compliance.

Does it need compressed air?

No. The 9029 runs without plant air; an autonomous pressurisation kit and a plant-air pressurisation kit are both listed as options.

How long does the ink circuit last?

More than 8000 hours of production. Markem-Imaje recommends a preventive maintenance procedure at 8000 hours and the M6 module is replaced in under six minutes.

Can it be stored between seasons?

Yes. The automatic printhead cleaning system provides clean start-ups after weeks of storage, which is why the 9029 is often used on seasonal lines.

What is the operating environment?

0 to 40 °C depending on the ink, and 10 to 90 % relative humidity non-condensing. The stainless steel cabinet is rated IP55.

Can I get a quotation for the 9029?

Send the message content, line speed, substrate, barcode requirement and annual production hours. MAISUI replies with a matched quotation and ink recommendation within 24 hours on business days.