The Markem-Imaje 9018 is an entry-level continuous inkjet (CIJ) coder for small-character codes on flexible packaging, rigid plastic, paper-based containers, liquid cartons and polymers. A single G printhead prints up to 3 lines at up to 3 m/s, characters from 1.8 to 8.7 mm high, and the M6 ink circuit can be swapped in under six minutes. The stainless steel cabinet is rated IP55 and needs no plant air.
Key facts at a glance
- Category
- Continuous inkjet (CIJ) small-character coder
- Model
- Markem-Imaje 9018
- Printhead
- Mono-jet G head, 71 dpi
- Lines and speed
- Up to 3 lines (4-line option); up to 3 m/s
- Character height
- 1.8-8.7 mm; font height 5-24 dots
- Ink circuit
- M6′; 2 sealed intelligent cartridges of 0.75 L
- Interface
- WYSIWYG backlit blue screen, 31 languages, USB port
- Protection
- IP55 stainless steel cabinet; no plant air required
What it is
The 9018 is the simplest coder in the Markem-Imaje continuous inkjet range. It prints date, batch and expiry codes, short text and logos on moving products without contact, so the code can follow the contour of a bottle, carton or pouch. Print data is created on the coder itself or loaded from a USB stick, and the machine starts printing within minutes of being plugged in.
The design is built around two serviceable blocks: the printhead with its automatic cleaning system, and the M6′ ink circuit that holds the ink and make-up fluid. Both are user-replaceable, which keeps a spare circuit on the shelf and avoids a service visit when an ink module reaches the end of its life.
How it works
- Mount the cabinet on a stand, table or wall bracket beside the conveyor, and position the printhead at the coding point with its 2 m umbilical.
- Fit the two 0.75 L intelligent cartridges. Each cartridge is keyed so the wrong ink cannot be fitted, and no priming or set-up step is required.
- Create the message on the backlit screen or import it from USB: fixed text, date and time formats, batch counters and logos.
- Connect the photocell and encoder so each product triggers a print at the right position.
- Start production. Jet Speed Control adjusts the print parameters to the line speed and the printhead-to-product distance, and the automatic printhead cleaning system prepares the jet at each start-up.
Key capabilities
- Three lines, up to 3 m/s. The G head covers most date and batch coding on packed food, beverage, household and industrial products.
- Characters from 1.8 to 8.7 mm. Font heights from 5 to 24 dots, with multi-line and mixed-height messages, bold and chimney characters.
- M6′ ink circuit. Swapped in less than six minutes by the operator, with no tools and no setting up.
- Sealed intelligent cartridges. 0.75 L cartridges, keyed against ink mix-ups, with automatic consumable management.
- IP55 stainless steel. Wash-down cabinet that needs no compressed air supply.
- Automatic printhead cleaning. Clean start-ups even after weeks in storage.
- 31 interface languages. Latin, Arabic, Cyrillic, Greek, Japanese, Chinese, Hebrew, Korean and Thai characters are supported.
- Quick-change accessories. Photocell, encoder, alarm beacon and conveyor stop output connect and disconnect without rewiring.
Where it fits
The 9018 is aimed at low to medium duty lines that need a reliable date or batch code at a controlled cost: small food and beverage producers, co-packers, and factories that run one or two coding stations. It handles porous and non-porous surfaces with the appropriate ink, and it is a good match where floor space is limited because the cabinet can be mounted vertically or on a wall.
Technical specifications
| Print technology | Continuous inkjet, mono-jet G printhead |
|---|---|
| Print resolution | 71 dpi |
| Print lines | Up to 3 lines; 4-line printing available as an option |
| Print speed | Up to 3 m/s |
| Font height | 5 to 24 dots |
| Character height | 1.8 to 8.7 mm |
| Characters | Latin, Arabic, Cyrillic, Greek, Japanese, Chinese, Hebrew, Korean, Thai |
| Message library | Up to 100 messages |
| Operator interface | Large WYSIWYG backlit blue screen, integrated help, 31 languages |
| Logo creation | On the operator interface |
| Ink system | M6′ ink circuit; 2 sealed intelligent cartridges of 0.75 L |
| Consumable handling | Cartridges automatically managed; printing parameters adjusted automatically |
| Connectivity | USB port standard; RS-232 optional |
| Accessory connections | Quick connect/disconnect for photocell, encoder, alarm |
| Printhead cleaning | Automatic cleaning system at start-up |
| Umbilical | 2 m flexible cable; 3 m option |
| Cabinet | Stainless steel |
| Protection rating | IP55 |
| Plant air | Not required |
| Operating temperature | 0 to 40 °C, depending on ink used |
| Humidity | 10 to 90 % non-condensing |
| Power supply | 100-120 V or 200-240 V with automatic switching; 50/60 Hz; 34 W |
| Weight | 18.5 kg |
| Mounting | Table-top, wall bracket or stand |
Inks and cartridges
The 9018 uses two sealed intelligent cartridges of 0.75 L each, one for ink and one for make-up. Markem-Imaje lists quick-drying black inks for the 9018, including a MEK-free option, plus high-adhesion inks for difficult substrates. The cartridge is keyed and the coder adjusts print parameters to the consumable automatically, so a change of ink is a consumable swap rather than a parameter change.
Ink choice follows the substrate and the process: porous paper and board, non-porous plastic, condensation on chilled packs and post-treatment such as pasteurisation all call for a specific grade. MAISUI matches the ink to the sample and to the local supply, and confirms compatibility with the cleaning and make-up schedule before the quotation.
Selection checklist
- How many print lines and what maximum character height does the code need?
- What line speed and what printhead-to-product distance will the installation have?
- Which substrates run on the line: paper, board, PE, PET, glass, metal, or a mix?
- Is the packing area subject to wash-down, dust or condensation? IP55 is the standard rating.
- Do you need logos and multi-language characters on the coder screen?
- Is a 2 m umbilical long enough, or is the 3 m option required?
- Do you need RS-232 for a line controller, or is stand-alone operation enough?
- Which ink – standard, MEK-free or high-adhesion – suits the material and the process?
Maintenance and service
The 9018 is designed for operator maintenance. The M6′ ink circuit is replaced as a module in under six minutes, and the printhead cleaning system runs automatically at start-up, which keeps the daily routine to a visual check and a wipe of the printhead. Markem-Imaje specifies a non-stop production capability of 6000 hours for the coder, and the machine can be stored for weeks without losing jet stability at the next start-up.
MAISUI supplies the coder with matched inks, spare cartridges and printhead consumables, and can arrange start-up support, operator training and a preventive maintenance schedule. Consumable consumption should be logged per shift so ink and make-up orders are predictable.
Frequently asked questions
What is the 9018?
The 9018 is Markem-Imaje's entry-level continuous inkjet coder. It prints up to 3 lines of date, batch and expiry codes at up to 3 m/s on flexible packaging, rigid plastic, paper containers, liquid cartons and polymers.
How many lines can it print?
Up to 3 lines as standard, with 4-line printing available as an option. Font heights run from 5 to 24 dots, giving characters from 1.8 to 8.7 mm.
How fast is it?
Up to 3 m/s. Actual coding speed depends on the number of lines, the character height and the required print quality, so confirm the message layout on your product.
Does it need compressed air?
No. The 9018 is specified as not requiring plant air. A printhead pressurisation kit is available as an option and that option does require plant air.
What inks does it use?
Two sealed intelligent cartridges of 0.75 L. Markem-Imaje lists quick-drying black inks including a MEK-free grade, plus high-adhesion inks for difficult substrates. Ink choice follows the material and the process.
How long does the ink circuit last?
The M6' ink circuit is a replaceable module; Markem-Imaje states a non-stop production capability of 6000 hours for the 9018. The circuit is changed by the operator in under six minutes.
Can it print barcodes?
The 9018 specification covers text, fonts and logos; 1D and 2D barcodes are not listed in this datasheet. If you need barcodes, look at the 9029 option list or the 9330, 9410 and 9450 models, and confirm the symbology before ordering.
What is the operating environment?
0 to 40 °C depending on the ink used, and 10 to 90 % relative humidity non-condensing. The cabinet is IP55 stainless steel for wash-down areas.
Can I get a quotation for the 9018?
Send the message layout, line speed, substrate and daily production hours. MAISUI replies with a matched quotation, ink recommendation and lead time within 24 hours on business days.