The HPRT HAM-PD400 is a intelligent deep-dyeing post-processing system with Φ400 x 390 mm processing volume, liquid immersion dyeing and 10-20 min per batch, built for colouring 3D printed polymer parts.
Key facts at a glance
- Category
- 3D printers and additive manufacturing
- Brand / model
- HPRT HAM-PD400
- Technology
- Liquid immersion dyeing
- Footprint
- 2000 x 1210 x 2000 mm
- Effective volume
- Φ400 x 390 mm
- Batch capacity
- One SJF-P380 build
- Cycle time
- 10-20 min
- Weight
- 500 kg
What it is
The HPRT HAM-PD400 is a intelligent deep-dyeing post-processing system. It works with Dye bath; compatible with SJF, SLS, SAF, MJF and HSS printed parts and produces parts within Φ400 x 390 mm processing volume. The machine is designed for colouring 3D printed polymer parts and fits into a workshop where parts are designed digitally and produced on demand.
Compared with subtractive machining, additive manufacturing builds the part layer by layer, so internal channels, lattices and short-run geometries that would need extra tooling can be produced directly from a file.
How it works
- Export the part as STL or the native job file and slice it for the machine.
- Prepare the machine: load material, check the build plate or powder bed and confirm the job.
- Run the build; the machine reports progress and any faults.
- Remove the finished part and clean off support, powder or resin.
- Carry out post-processing: Used after powder removal to give parts a uniform colour through the section.
- Inspect the part against the drawing and log the build parameters.
Materials and consumables
Dye bath; compatible with SJF, SLS, SAF, MJF and HSS printed parts. Consumable quality and storage affect the result: keep filament dry, keep resin out of UV light and handle powder in a controlled area. HPRT specifies the material range for the machine; test the actual material before production.
Software and workflow
Parts are prepared in a slicer or the printer software and sent to the machine via memory card or network, depending on the model. For production use, keep a job library with versioned files and record which machine and material produced each part, so the same result can be repeated.
Key capabilities
- Technology. Liquid immersion dyeing.
- Footprint. 2000 x 1210 x 2000 mm.
- Effective volume. Φ400 x 390 mm.
- Batch capacity. One SJF-P380 build.
- Cycle time. 10-20 min.
- Weight. 500 kg.
- Max. temperature. 115 °C.
- Air requirement. 7 bar; max. 1.5 m³ per cycle.
Where it fits
- colouring 3D printed polymer parts
- consumer products and prototypes
- small-batch coloured production
Typical environment: a design office, workshop or production cell where parts are made in small batches and design changes are frequent.
HPRT 3D printing range at a glance
| Model | Type | Build / process size | Typical use |
|---|---|---|---|
| SJF-P380 | Industrial powder-bed (SJF) | 380 x 280 x 380 mm | Functional parts and small-batch production |
| HAM-PC800 | Powder cleaning | 57 L per batch | Post-processing after printing |
| HAM-PD400 | Deep dyeing | Φ400 x 390 mm | Colouring 3D printed parts |
| F210 | Desktop FDM | 220 x 220 x 250 mm | Prototypes, jigs, teaching |
| FDM-F110 | Entry desktop FDM | 100 x 100 x 85 mm | Education and small models |
| LCD-L228 | LCD resin | 228 x 121 x 300 mm | High-detail prototypes and models |
| LCD-L298 | 8K LCD elastomer | 294 x 160 x 400 mm | Elastomer parts, footwear, robotics |
Technical specifications
| Technology | Liquid immersion dyeing |
|---|---|
| Footprint | 2000 x 1210 x 2000 mm |
| Effective volume | Φ400 x 390 mm |
| Batch capacity | One SJF-P380 build |
| Cycle time | 10-20 min |
| Weight | 500 kg |
| Max. temperature | 115 °C |
| Air requirement | 7 bar; max. 1.5 m³ per cycle |
Site requirements and installation
Plan power, compressed air (if required by the model), ventilation and floor space before delivery. Powder and resin processes need controlled handling and waste. Confirm the exact services with MAISUI during project scoping.
Selection checklist
- What part size, material and accuracy are required?
- Is the part for prototyping, tooling or end-use production?
- What monthly volume and build frequency should the machine handle?
- Which post-processing steps are needed, and who performs them?
- What power, air and ventilation are available on site?
- Who will operate, maintain and service the machine?
Maintenance and service
Follow the manufacturer service schedule for the hot end, optics, powder handling or resin vat, and keep spare consumables on site. MAISUI provides installation support, training and after-sales service.
Frequently asked questions
What is the HAM-PD400?
An intelligent deep-dyeing system for 3D printed polymer parts.
Which printing processes are supported?
Parts from SJF, SLS, SAF, MJF and HSS processes.
What is the processing volume?
Φ400 x 390 mm, one SJF-P380 build per batch.
How long is a cycle?
10 to 20 minutes.
What temperature does it reach?
Up to 115 °C.
What air supply is needed?
7 bar, up to 1.5 m³ per cycle.
Does dyeing affect dimensions?
Dyeing is a surface and near-surface process; check tolerance requirements on your part.
What maintenance is required?
Dye bath maintenance and filtration per the manufacturer schedule.
Can it run next to the printer?
Yes, it is designed as a post-processing unit for a 3D printing line.
Can I get a quotation?
Send part size and volume through the contact form.