The Markem-Imaje SmartDate X30 is a compact one-box thermal transfer overprinter for date, batch and barcode coding on flexible film. It prints at 300 dpi and up to 600 mm/s, runs without plant air, and is available in intermittent and continuous versions for low-to-medium-speed packaging lines.
Key facts at a glance
- Category
- Thermal transfer overprinter (TTO)
- Model
- SmartDate X30 (intermittent / continuous)
- Resolution
- 300 dpi
- Print speed
- Up to 600 mm/s
- Print area
- 32 x 40 mm intermittent; 32 x 100 mm continuous
- Ribbon
- 22 mm and 33 mm wide; up to 700 m
- Air supply
- Not required
- Interface
- USB 2.0, RS232 and Ethernet; optional RUI and handheld terminal
Intermittent or continuous?
The SmartDate X30 is available in two configurations that share the same 300 dpi printhead. Choose the version that matches how your packaging machine moves the film.
| Configuration | Print speed | Print area | Weight | Typical fit |
|---|---|---|---|---|
| Intermittent | 100-600 mm/s | 32 x 40 mm | 5.5 kg | Packaging machines that index or dwell between packs; low-to-medium-speed lines. |
| Continuous | 50-600 mm/s | 32 x 100 mm | 5.0 kg | Continuous-motion film lines; longer codes with more data per pack. |
Both versions leave a 0.5 mm gap between prints and use the same 22 mm or 33 mm ribbons.
What it is
The SmartDate X30 is a thermal transfer overprinter (TTO) that prints variable data onto flexible film by transferring ink from a ribbon with a heated printhead. It is a one-box unit that mounts on a packaging machine or is integrated by an OEM, and prints dates, best-before dates, batch and serial numbers, 1D barcodes and 2D codes at 300 dpi.
The unit measures approximately 20 x 17 x 18 cm and needs no plant air supply. Its Advanced Consumables Management (ACM) system recognises the ribbon and printhead automatically and adjusts the printer, while dead-dot detection monitors the printhead to catch missing dots before they cause faulty codes.
How it works
- Mount the X30 on the packaging machine at the coding position, or integrate it with the OEM line.
- Load a 22 mm or 33 mm SmartDate ribbon; the ACM system recognises it and adjusts the printer.
- Create the message on the optional RUI, handheld terminal, CoLOS software or line controller.
- Set the print position and start the line; the coder prints in intermittent or continuous mode as the film moves.
- Check the first packs, monitor status on the LED indicators or RUI, and replace the ribbon when it runs out.
Control, software and integration
- Airless operation. No plant air supply is needed, which simplifies installation and avoids an air line at the coding position.
- ACM and dead-dot detection. Ribbons and printhead are automatically recognised and adjusted; printhead monitoring helps keep code quality consistent.
- Automatic data. Real-time clock, dates, auto-updating best-before dates, shift codes and serial numbers, with multiple variable input fields for alphanumeric text.
- Codes and fonts. 1D and 2D barcodes including Han Xin, GS1, DataMatrix, QR, Composite and RSS; TrueType fonts including non-Roman characters.
- Line interfaces. Print go and one configurable input; fault and warning outputs; USB 2.0, RS232 and Ethernet; web browser and Virtual Network Computing access.
- Remote control. Optional 10.1-inch colour RUI or handheld terminal, hot-swappable, with configurable home screen, five key production metrics and password-protected user profiles.
- Fleet control. Parent/Child function controls up to seven printers from one master; LED status indicators on the printer.
- Software. CoLOS Free is included; CoLOS Base, Line and Factory are optional for message creation, code management, inspection and ERP/MES/WMS integration.
- Ribbon save. Radial and interlaced ribbon-save modes help reduce ribbon consumption; ribbons are available up to 700 m.
Where it fits
The X30 is aimed at low-to-medium-speed lines printing on flexible film: snack, bakery, pasta, produce and confectionery packs, plus sachets, pouches and labels. It prints best-before dates, batch and serial numbers, and 1D or 2D codes directly on the film or label, with no plant air.
Technical specifications
| Print technology | Thermal transfer overprinting with ribbon |
|---|---|
| Print resolution | 300 dpi |
| Configurations | Intermittent and continuous |
| Print speed | Intermittent: 100-600 mm/s; continuous: 50-600 mm/s |
| Print area | Intermittent: 32 x 40 mm; continuous: 32 x 100 mm |
| Gap between prints | 0.5 mm |
| Ribbon | 22 mm and 33 mm wide; up to 700 m; radial and interlaced ribbon-save modes; SmartDate Xceed, Xtra and Xpert ribbon ranges |
| Codes and fonts | 1D and 2D barcodes including Han Xin, GS1, DataMatrix, QR, Composite and RSS; TrueType fonts including non-Roman characters |
| Inputs / outputs | Inputs: Print go and 1 configurable input. Outputs: fault and warning |
| Software interface | USB 2.0; RS232; Ethernet; web browser on host PC; Virtual Network Computing |
| Other control | Parent/Child function for up to 7 printers; LED status indicators |
| User interface | Optional 10.1-inch colour RUI; optional handheld terminal; hot-swappable/removable interface |
| Software | CoLOS Free included; CoLOS Base, Line and Factory optional |
| Weight | 5.5 kg intermittent; 5.0 kg continuous |
| Dimensions | Approximately 20 x 17 x 18 cm |
| Environment | 0-40 °C; 10-90% RH non-condensing |
| Power | 110-230 VAC (+/- 10%), 50-60 Hz; 24 VDC without power supply |
| Air supply | Not required |
| Accessories and options | Mounting bracket, encoders, barcode scanner; enhanced diagnostics, print adjust and on-board password protection |
Ribbons matched to the coder
The X30 uses 22 mm or 33 mm thermal transfer ribbons up to 700 m long, with radial and interlaced ribbon-save modes. Markem-Imaje recommends its SmartDate Xceed, Xtra and Xpert ranges; MAISUI supplies matched TTO ribbons cut to these widths and can test the grade on your film before production. Use TTO-grade ribbon, not a flat-head thermal transfer printer ribbon.
Selection checklist
- Does the packaging machine index the film between packs (intermittent) or run continuously?
- What print area does the code need: 32 x 40 mm or 32 x 100 mm?
- What line speed must the coder match, up to 600 mm/s?
- Which data changes per pack: dates, best-before dates, batch, serial or shift codes?
- Which codes are needed: 1D barcode, DataMatrix, QR, GS1 or a combination?
- How will the coder connect to the line: Print go, PLC, Ethernet or a host PC?
- Do you need the 10.1-inch RUI, a handheld terminal, a mounting bracket or an encoder?
- Which ribbon width and grade suits the film and code, and can the supplier test it?
Maintenance and service
Clean the printhead at the interval your film and dust level require, and use the ACM system and dead-dot detection to monitor ribbon and printhead condition. Replace ribbons and worn printheads before code quality drops. No plant air supply is required. MAISUI supplies TTO ribbons, supports the coder with spare parts and after-sales service, and can test the ribbon on your film.
Frequently asked questions
What is the difference between the intermittent and continuous X30?
The intermittent version prints at 100-600 mm/s with a 32 x 40 mm print area and weighs 5.5 kg. The continuous version prints at 50-600 mm/s with a 32 x 100 mm print area and weighs 5.0 kg. Both use the same 300 dpi printhead and leave a 0.5 mm gap between prints.
What print resolution and print area does it offer?
The SmartDate X30 prints at 300 dpi. The print area is 32 x 40 mm on the intermittent version and 32 x 100 mm on the continuous version.
How fast can it print?
Print speed is up to 600 mm/s in both configurations: 100-600 mm/s intermittent and 50-600 mm/s continuous. The right version depends on whether your packaging machine indexes the film between packs or runs continuously.
Does it need compressed air?
No. The SmartDate X30 is airless and does not require a plant air supply. It needs only the electrical supply: 110-230 VAC, 50-60 Hz, or 24 VDC when supplied without a power supply.
Which ribbons does it use?
The X30 uses 22 mm or 33 mm thermal transfer ribbons up to 700 m long. Markem-Imaje recommends its SmartDate Xceed, Xtra and Xpert ribbon ranges. MAISUI supplies matched TTO ribbons in these widths and can test the grade on your film.
Can it print barcodes and 2D codes?
Yes. It supports 1D and 2D codes including Han Xin, GS1 standard compliant codes, DataMatrix, QR, Composite and RSS barcodes. It also prints real-time clock data, dates, auto-updating best-before dates, shift codes and serial numbers.
What interfaces does it offer?
Hardware inputs are Print go plus one configurable input, with fault and warning outputs. Software interfaces include USB 2.0, RS232 and Ethernet, with web browser and Virtual Network Computing access. An optional 10.1-inch colour remote user interface or handheld terminal is available.
Can it be integrated with a packaging machine or OEM line?
Yes. The X30 is a one-box unit designed for line mounting or OEM integration. A mounting bracket, encoders and barcode scanner are available, and the Parent/Child function can control up to seven printers from one master.
Do you supply ribbons, spare parts and service?
Yes. MAISUI supplies matched TTO ribbons and can supply 22 mm or 33 mm widths to order, and can test the grade on your film.
Can I get a quotation for this product?
Send the machine type, film width, code size and line speed. MAISUI replies with a matched quotation within 24 hours on business days, and confirms lead time together with the quotation.