The HPRT FC107 and FC128 are high-speed wide-format thermal transfer overprinters with 107 mm and 128 mm print widths at 300 dpi for flexible packaging.
Key facts at a glance
- Category
- Thermal transfer overprinter (TTO)
- Brand / model
- HPRT FC107 / FC128
- Print resolution
- 300 dpi (12 dots/mm)
- Print width
- 107 mm / 128 mm
- Intermittent area
- 107/128 x 75 mm
- Continuous area
- 107/128 x 150 mm
What it is
The HPRT FC107 and FC128 are high-speed wide-format thermal transfer overprinters with 107 mm and 128 mm print widths at 300 dpi for flexible packaging. It prints variable data onto flexible film and labels without pre-printed panels, so dates, batch codes and 2D codes can change every pack.
How it works
- Mount the printhead on the packaging machine at the coding position.
- Load the ribbon and set the print gap and code position.
- Configure the message, date rules and code content.
- Print test packs and check grade and position.
- Track ribbon consumption and clean the printhead on schedule.
Key capabilities
- Print resolution. 300 dpi (12 dots/mm).
- Print width. 107 mm / 128 mm.
- Intermittent area. 107/128 x 75 mm.
- Continuous area. 107/128 x 150 mm.
- Print modes. Intermittent and continuous.
- Ribbon. Clip-style cartridge with automatic identification.
Where it fits
Used on pouch, sachet, flow-wrap and label lines where the code changes per pack.
Technical specifications
| Model name | FC107 / FC128 |
|---|---|
| Structure | All-metal, intermittent/continuous and left/right hand integrated |
| Print mode | Thermal transfer |
| Max. print width | 107 / 128 mm (300 dpi) |
| Print area | 107/128 x 75 mm intermittent; 107/128 x 150 mm continuous |
| Resolution | 300 dpi (12 dots/mm) |
| Print speed | 10 mm/s intermittent / 50 mm/s continuous, up to 700 mm/s |
| Processor | 32-bit RISC processor |
| DRAM | Minimum 16 MB |
| RTC | Standard, battery life at least 3 years |
| Sensors | Ribbon tension, printhead position, cover open, printhead over-temperature, ribbon break |
| Packaging detection | Electromagnetic induction or encoder |
| Material type | PVDC, PET, PE, NY, CPP, OPP, BOPP, BOPET, BOPA, VMPET, VMCPP and similar films and laminates |
| Ribbon type | Wax-resin / resin |
| Ribbon capacity | Up to 900 m on 1-inch core (max OD 90 mm) |
| Ribbon width | 55-109 mm (FC107); 130 mm (FC128) |
| Ribbon save | Interlaced, radial, multi-print signal, digital ribbon save and ribbon pullback modes |
| Air supply | Maximum 6 bar / 90 psi |
Selection checklist
- Which film and code size are used?
- What line speed must be matched?
- Intermittent or continuous motion?
- Which interface does the packaging machine provide?
- Which ribbon grade matches the film?
- Who installs and services the coder?
Maintenance and service
Keep the printhead clean, use the specified ribbon and replace worn printheads before code quality drops. MAISUI supplies matched TTO ribbons, spare parts and installation support.
Frequently asked questions
What are the FC107 and FC128?
They are wide-format TTO printers with 107 mm and 128 mm print widths for flexible packaging.
What resolution do they print?
300 dpi (12 dots/mm).
What print areas are available?
107/128 x 75 mm in intermittent mode and 107/128 x 150 mm in continuous mode.
Do they support both print modes?
Yes, both intermittent and continuous printing are supported.
How is the ribbon loaded?
A clip-style ribbon cartridge with automatic ribbon identification.
Does it detect printhead faults?
Yes, it detects printhead dead dots and printer status.
Can it print barcodes?
Yes, it prints dates, batch numbers, 1D and 2D barcodes.
Can I get a datasheet and quotation?
Send your film, code and line details through the contact form; MAISUI replies with a quotation and specification sheet.