The Domino Vx150i is a 300 dpi TTO with 32 mm and 53 mm printheads, print rates up to 6 prints per second and cassette-based ribbon loading.
Key facts at a glance
- Category
- Thermal transfer overprinter (TTO)
- Brand / model
- Domino Vx150i
What it is
The Domino Vx150i is a 300 dpi TTO with 32 mm and 53 mm printheads, print rates up to 6 prints per second and cassette-based ribbon loading. It prints variable data onto flexible film and labels without pre-printed panels, so dates, batch codes and 2D codes can change every pack.
How it works
- Mount the printhead on the packaging machine at the coding position.
- Load the ribbon and set the print gap and code position.
- Configure the message, date rules and code content.
- Print test packs and check grade and position.
- Track ribbon consumption and clean the printhead on schedule.
Key capabilities
- Print resolution. 300 dpi.
- Print heads. 32 mm and 53 mm.
- Print area. 32 x 75 mm / 53 x 75 mm; 32 x 100 mm / 53 x 100 mm.
- Print rate. Up to 6 prints per second.
- Print speed. 10-750 mm/s.
- Ribbon system. Cassette-based, with ribbon-saving modes up to 60%.
Where it fits
Used on pouch, sachet, flow-wrap and label lines where the code changes per pack.
Technical specifications
| Print resolution | 300 dpi |
|---|---|
| Print heads | 32 mm and 53 mm |
| Print area | 32 x 75 mm / 53 x 75 mm; 32 x 100 mm / 53 x 100 mm |
| Print rate | Up to 6 prints per second |
| Print speed | 10-750 mm/s |
| Ribbon system | Cassette-based, with ribbon-saving modes up to 60% |
| Max. print width | 53 mm |
| Ribbon saving | Up to 60% per print, four modes |
Selection checklist
- Which film and code size are used?
- What line speed must be matched?
- Intermittent or continuous motion?
- Which interface does the packaging machine provide?
- Which ribbon grade matches the film?
- Who installs and services the coder?
Maintenance and service
Keep the printhead clean, use the specified ribbon and replace worn printheads before code quality drops. MAISUI supplies matched TTO ribbons, spare parts and installation support.
Ribbons and consumables
Domino Vx series ribbons are produced under ISO 9001 and are matched to the printhead width and film. Four ribbon-saving modes can reduce consumption, and the AR (Advanced Ribbon) grade codes up to 20% more per roll than the standard grade. Codes, film type and storage conditions determine the grade; MAISUI supplies matched ribbons and advises on handling and storage.
Frequently asked questions
What resolution does the Vx150i print?
300 dpi.
Which printheads are available?
32 mm and 53 mm.
How fast does it print?
Up to 6 prints per second, with print speeds from 10 to 750 mm/s.
What print areas are available?
32/53 x 75 mm and 32/53 x 100 mm depending on mode.
How is the ribbon loaded?
A cassette-based system for quick changeover.
Does it save ribbon?
Yes, ribbon-saving modes can cut consumption by up to 60% per print.
What codes can it print?
Dates, batch codes, barcodes and 2D codes on flexible packaging.
Can I get a datasheet and quotation?
Send your film, code and line details through the contact form; MAISUI replies with a quotation and specification sheet.