Guangzhou, China · Smart Manufacturing Solutions [email protected] / +86 20 3337 2844
Home/Products/Identification & Data Capture/HPRT RF1 Handheld UHF RFID Sled
HPRT RF1 Handheld UHF RFID Sled
Identification & Data Capture

HPRT RF1 Handheld UHF RFID Sled

HPRT RF1 handheld UHF RFID sled: EPC Class 1 Gen 2, 7-9 m read distance, up to 200 tags per 5 s, IP54, 3200 mAh battery. Request a MAISUI quotation.

  • HPRT RF1
  • Up to 7-9 m read range
  • 200 tags per 5 s
  • EPC Class 1 Gen 2
Browse the range
MAISUI product teamUpdated 23 Nov 2026Manufacturer product page, 2026

The HPRT RF1 is a handheld ultra-high frequency RFID sled that adds long-range RFID reading and writing to a compatible handheld device, with a read distance of up to 7-9 metres and up to 200 tags per 5 seconds.

Key facts at a glance

Category
Handheld RFID sled
Model
HPRT RF1
Read distance
Up to 7-9 m
Read speed
Up to 200 tags per 5 s
Protocol
EPC Class 1 Gen 2 (ISO 18000-6C)
Protection
IP54

What it is

The RF1 is an RFID sled rather than a standalone reader: it clamps onto a compatible handheld device through a sleeve accessory and communicates over a POGO PIN serial interface. The handheld runs the inventory or asset application; the sled provides the UHF radio and antenna.

It is aimed at teams that already use a handheld for barcode work and need to read RFID tags in bulk: warehouse inventory, asset checks, retail stock counts and logistics.

How it works

  1. Fit the sled to the handheld with the matching sleeve accessory.
  2. Pair or connect over the POGO PIN interface and start the RFID application.
  3. Select the read mode and power level for the environment.
  4. Move through the aisle or storage area and read tags in bulk.
  5. Review the count on the handheld and export the result.
  6. Charge the sled on the desktop cradle at the end of the shift.

Key capabilities

  • Long read range. Up to 7-9 m, so a full shelf or pallet can be read without approaching each item.
  • Bulk reading. Up to 200 tags per 5 seconds for fast stock counts.
  • Standard protocol. EPC Class 1 Gen 2 (ISO 18000-6C) covers common UHF tags.
  • POGO PIN connection. Serial interface through the handheld sleeve accessory.
  • Detachable battery. 3200 mAh lithium-ion, about 3 hours to charge.
  • Desktop cradle. Charges at 5 V / 2 A.
  • Industrial protection. IP54 and a -20 to 50 °C working range.
  • Visible status. Two LEDs show red, green, yellow and blue states.

Where it fits

WarehousingInventory checksAsset inspectionRetailLogistics

Use it where counting tags one by one is too slow: warehouse cycle counts, pallet and location checks, tool and asset audits, retail stock counts and inbound/outbound verification.

Technical specifications

Model RF1
Type Handheld ultra-high frequency RFID sled
Communication interface Serial interface (POGO PIN)
Connection Attaches to a handheld device via a sleeve accessory
RFID module EPC Class 1 Gen 2 (ISO 18000-6C)
Read distance Up to 7-9 m
Read speed Up to 200 tags per 5 seconds
LED indicator Two simultaneous LEDs: red, green, yellow, blue
Battery 3200 mAh detachable lithium-ion; 3-hour charge
Charging 5 V / 2 A via desktop charging cradle
Protection IP54
Operating temperature -20 to 50 °C
Storage temperature -40 to 60 °C

Selection checklist

  • Which handheld model will the sled attach to, and is a sleeve available?
  • Which RFID tags are used, and are they EPC Class 1 Gen 2?
  • What read distance is needed in the aisle?
  • How many tags per count, and how often?
  • Is the environment dusty or wet enough to require IP54 and the temperature range?
  • How many spare batteries and cradles are needed per shift?

Maintenance and service

Charge on the cradle, keep the POGO PIN contacts clean and inspect the sleeve fitting for wear. MAISUI supplies matched sleeves, batteries, cradles and after-sales support.

Frequently asked questions

What is the HPRT RF1?

A handheld UHF RFID sled that adds long-range RFID reading to a compatible handheld device.

How far can it read tags?

Up to 7-9 metres, depending on the tag and environment.

How fast does it read?

Up to 200 pieces in 5 seconds.

Which RFID protocol does it support?

EPC Class 1 Gen 2 (ISO 18000-6C).

How does it connect?

It attaches to the handheld device through a sleeve accessory and communicates over a serial POGO PIN interface.

Does it have its own battery?

Yes, a 3200 mAh detachable lithium-ion battery charged in about 3 hours.

How is it charged?

On a desktop charging cradle at 5 V / 2 A.

Is it protected for warehouse use?

Yes, IP54, with a working range of -20 to 50 °C.

What applications suit it?

Warehousing, inventory checks, asset inspection, retail and logistics.

Can I get a quotation?

Send your handheld model and application through the contact form; MAISUI replies with a quotation.