Guangzhou, China · Smart Manufacturing Solutions [email protected] / +86 20 3337 2844
Home/Products/3D Printers/HPRT LCD-L298 Elastomer Resin 3D Printer
HPRT LCD-L298 Elastomer Resin 3D Printer
3D Printers

HPRT LCD-L298 Elastomer Resin 3D Printer

HPRT LCD-L298 8k lcd resin 3d printer for elastomeric materials: LCD selective area light transmission; request a MAISUI quotation and specification sheet.

  • HPRT LCD-L298
  • LCD selective area light transmission
  • 6480 x 3600 (8K)
  • 405 nm
Browse the range
MAISUI product teamUpdated 22 Nov 2026Manufacturer product page, 2026

The HPRT LCD-L298 is a 8K LCD elastomer resin 3D printer with 294 x 160 x 400 mm, 0.01-0.3 mm and 20-80 mm/h, built for elastomer parts for footwear.

Key facts at a glance

Category
3D printers and additive manufacturing
Brand / model
HPRT LCD-L298
Molding principle
LCD selective area light transmission
Resolution
6480 x 3600 (8K)
Wavelength
405 nm
Layer thickness
0.01-0.3 mm
XY accuracy
46 µm
Build size
294 x 160 x 400 mm

What it is

The HPRT LCD-L298 is a 8K LCD elastomer resin 3D printer. It works with Elastomer and photosensitive resins, 405 nm and produces parts within 294 x 160 x 400 mm. The machine is designed for elastomer parts for footwear and fits into a workshop where parts are designed digitally and produced on demand.

Compared with subtractive machining, additive manufacturing builds the part layer by layer, so internal channels, lattices and short-run geometries that would need extra tooling can be produced directly from a file.

How it works

  1. Export the part as STL or the native job file and slice it for the machine.
  2. Prepare the machine: load material, check the build plate or powder bed and confirm the job.
  3. Run the build; the machine reports progress and any faults.
  4. Remove the finished part and clean off support, powder or resin.
  5. Carry out post-processing: Elastomer parts need controlled washing and curing to keep their mechanical properties.
  6. Inspect the part against the drawing and log the build parameters.

Materials and consumables

Elastomer and photosensitive resins, 405 nm. Consumable quality and storage affect the result: keep filament dry, keep resin out of UV light and handle powder in a controlled area. HPRT specifies the material range for the machine; test the actual material before production.

Software and workflow

Parts are prepared in a slicer or the printer software and sent to the machine via memory card or network, depending on the model. For production use, keep a job library with versioned files and record which machine and material produced each part, so the same result can be repeated.

Key capabilities

  • Molding principle. LCD selective area light transmission.
  • Resolution. 6480 x 3600 (8K).
  • Wavelength. 405 nm.
  • Layer thickness. 0.01-0.3 mm.
  • XY accuracy. 46 µm.
  • Build size. 294 x 160 x 400 mm.
  • Printing speed. 20-80 mm/h.
  • Light source. COB + Fresnel lens.
  • Touchscreen. 13.3 inch.

Where it fits

  • elastomer parts for footwear
  • robotics and grippers
  • medical and wearable models

Typical environment: a design office, workshop or production cell where parts are made in small batches and design changes are frequent.

HPRT 3D printing range at a glance

Model Type Build / process size Typical use
SJF-P380 Industrial powder-bed (SJF) 380 x 280 x 380 mm Functional parts and small-batch production
HAM-PC800 Powder cleaning 57 L per batch Post-processing after printing
HAM-PD400 Deep dyeing Φ400 x 390 mm Colouring 3D printed parts
F210 Desktop FDM 220 x 220 x 250 mm Prototypes, jigs, teaching
FDM-F110 Entry desktop FDM 100 x 100 x 85 mm Education and small models
LCD-L228 LCD resin 228 x 121 x 300 mm High-detail prototypes and models
LCD-L298 8K LCD elastomer 294 x 160 x 400 mm Elastomer parts, footwear, robotics

Technical specifications

Molding principle LCD selective area light transmission
Resolution 6480 x 3600 (8K)
Wavelength 405 nm
Layer thickness 0.01-0.3 mm
XY accuracy 46 µm
Build size 294 x 160 x 400 mm
Printing speed 20-80 mm/h
Light source COB + Fresnel lens
Touchscreen 13.3 inch

Site requirements and installation

Plan power, compressed air (if required by the model), ventilation and floor space before delivery. Powder and resin processes need controlled handling and waste. Confirm the exact services with MAISUI during project scoping.

Selection checklist

  • What part size, material and accuracy are required?
  • Is the part for prototyping, tooling or end-use production?
  • What monthly volume and build frequency should the machine handle?
  • Which post-processing steps are needed, and who performs them?
  • What power, air and ventilation are available on site?
  • Who will operate, maintain and service the machine?

Maintenance and service

Follow the manufacturer service schedule for the hot end, optics, powder handling or resin vat, and keep spare consumables on site. MAISUI provides installation support, training and after-sales service.

Frequently asked questions

What is the LCD-L298?

An 8K LCD resin printer for elastomeric materials with a 294 x 160 x 400 mm build volume.

What is the resolution?

6480 x 3600 (8K).

What is the XY accuracy?

46 µm.

Which resin does it use?

405 nm elastomer and photosensitive resins.

What layer thickness can it print?

0.01 to 0.3 mm.

How fast does it print?

20 to 80 mm per hour.

What is the light source?

COB light source with Fresnel lens.

What applications suit it?

Footwear elastomer parts, robotics, medical and wearable models.

Is there a touchscreen?

Yes, a 13.3-inch touchscreen.

Can I get a quotation?

Send your application through the contact form.