Guangzhou, China · Smart Manufacturing Solutions [email protected] / +86 20 3337 2844
Home/Products/3D Printers/HPRT LCD-L228 Resin 3D Printer
HPRT LCD-L228 Resin 3D Printer
3D Printers

HPRT LCD-L228 Resin 3D Printer

HPRT LCD-L228 lcd resin 3d printer with selective area light transmission: LCD selective area light transmission; request a MAISUI quotation and specification

  • HPRT LCD-L228
  • LCD selective area light transmission
  • 385 nm / 405 nm
  • 0.01-0.2 mm
Browse the range
MAISUI product teamUpdated 22 Nov 2026Manufacturer product page, 2026

The HPRT LCD-L228 is a LCD resin 3D printer with 228 x 121 x 300 mm, 0.01-0.2 mm and 60-80 mm/h, built for rapid prototyping.

Key facts at a glance

Category
3D printers and additive manufacturing
Brand / model
HPRT LCD-L228
Molding principle
LCD selective area light transmission
Wavelength
385 / 405 nm
Layer thickness
0.01-0.2 mm
XY accuracy
29.7 µm
Build size
228 x 121 x 300 mm
Printing speed
60-80 mm/h

What it is

The HPRT LCD-L228 is a LCD resin 3D printer. It works with Photosensitive resin, 385/405 nm and produces parts within 228 x 121 x 300 mm. The machine is designed for rapid prototyping and fits into a workshop where parts are designed digitally and produced on demand.

Compared with subtractive machining, additive manufacturing builds the part layer by layer, so internal channels, lattices and short-run geometries that would need extra tooling can be produced directly from a file.

How it works

  1. Export the part as STL or the native job file and slice it for the machine.
  2. Prepare the machine: load material, check the build plate or powder bed and confirm the job.
  3. Run the build; the machine reports progress and any faults.
  4. Remove the finished part and clean off support, powder or resin.
  5. Carry out post-processing: Parts are washed and cured after printing; resin handling and waste need a controlled process.
  6. Inspect the part against the drawing and log the build parameters.

Materials and consumables

Photosensitive resin, 385/405 nm. Consumable quality and storage affect the result: keep filament dry, keep resin out of UV light and handle powder in a controlled area. HPRT specifies the material range for the machine; test the actual material before production.

Software and workflow

Parts are prepared in a slicer or the printer software and sent to the machine via memory card or network, depending on the model. For production use, keep a job library with versioned files and record which machine and material produced each part, so the same result can be repeated.

Key capabilities

  • Molding principle. LCD selective area light transmission.
  • Wavelength. 385 / 405 nm.
  • Layer thickness. 0.01-0.2 mm.
  • XY accuracy. 29.7 µm.
  • Build size. 228 x 121 x 300 mm.
  • Printing speed. 60-80 mm/h.
  • Light source. COB + Fresnel lens.
  • Touchscreen. 10.1 inch.

Where it fits

  • rapid prototyping
  • dental and medical models
  • consumer product models

Typical environment: a design office, workshop or production cell where parts are made in small batches and design changes are frequent.

HPRT 3D printing range at a glance

Model Type Build / process size Typical use
SJF-P380 Industrial powder-bed (SJF) 380 x 280 x 380 mm Functional parts and small-batch production
HAM-PC800 Powder cleaning 57 L per batch Post-processing after printing
HAM-PD400 Deep dyeing Φ400 x 390 mm Colouring 3D printed parts
F210 Desktop FDM 220 x 220 x 250 mm Prototypes, jigs, teaching
FDM-F110 Entry desktop FDM 100 x 100 x 85 mm Education and small models
LCD-L228 LCD resin 228 x 121 x 300 mm High-detail prototypes and models
LCD-L298 8K LCD elastomer 294 x 160 x 400 mm Elastomer parts, footwear, robotics

Technical specifications

Molding principle LCD selective area light transmission
Wavelength 385 / 405 nm
Layer thickness 0.01-0.2 mm
XY accuracy 29.7 µm
Build size 228 x 121 x 300 mm
Printing speed 60-80 mm/h
Light source COB + Fresnel lens
Touchscreen 10.1 inch

Site requirements and installation

Plan power, compressed air (if required by the model), ventilation and floor space before delivery. Powder and resin processes need controlled handling and waste. Confirm the exact services with MAISUI during project scoping.

Selection checklist

  • What part size, material and accuracy are required?
  • Is the part for prototyping, tooling or end-use production?
  • What monthly volume and build frequency should the machine handle?
  • Which post-processing steps are needed, and who performs them?
  • What power, air and ventilation are available on site?
  • Who will operate, maintain and service the machine?

Maintenance and service

Follow the manufacturer service schedule for the hot end, optics, powder handling or resin vat, and keep spare consumables on site. MAISUI provides installation support, training and after-sales service.

Frequently asked questions

What is the LCD-L228?

An LCD resin 3D printer with a 228 x 121 x 300 mm build volume.

What is the XY accuracy?

29.7 µm.

What layer thickness can it print?

0.01 to 0.2 mm.

Which resin wavelength does it use?

385 nm or 405 nm.

How fast does it print?

60 to 80 mm per hour depending on layer and part.

What light source does it use?

A COB light source with Fresnel lens.

What post-processing is needed?

Washing and post-curing; resin waste must be handled properly.

What applications suit it?

Prototypes, dental and medical models, consumer product models.

Is a touchscreen included?

Yes, a 10.1-inch touchscreen.

Can I get a quotation?

Send your application through the contact form.