The HPRT SJF-P380 is a industrial selective jet fusion additive manufacturing system with 380 x 280 x 380 mm, 0.08 mm (0.05-0.15 mm) and 3830 cm³/h; full build 11 h, built for functional prototypes and end-use parts.
Key facts at a glance
- Category
- 3D printers and additive manufacturing
- Brand / model
- HPRT SJF-P380
- Technology
- Selective jet fusion, single agent
- Build size
- 380 x 280 x 380 mm
- Machine size
- 2500 x 1400 x 1570 mm
- Build speed
- 3830 cm³/h
- Full build time
- 11 h
- Layer thickness
- 0.08 mm (0.05-0.15 mm)
What it is
The HPRT SJF-P380 is a industrial selective jet fusion additive manufacturing system. It works with Powder-bed polymer powder, 2:8 old-to-new powder ratio and produces parts within 380 x 280 x 380 mm. The machine is designed for functional prototypes and end-use parts and fits into a workshop where parts are designed digitally and produced on demand.
Compared with subtractive machining, additive manufacturing builds the part layer by layer, so internal channels, lattices and short-run geometries that would need extra tooling can be produced directly from a file.
How it works
- Export the part as STL or the native job file and slice it for the machine.
- Prepare the machine: load material, check the build plate or powder bed and confirm the job.
- Run the build; the machine reports progress and any faults.
- Remove the finished part and clean off support, powder or resin.
- Carry out post-processing: Parts are unpacked, cleaned in the HAM-PC800 powder cleaning unit and can be dyed in the HAM-PD400 deep-dyeing unit.
- Inspect the part against the drawing and log the build parameters.
Materials and consumables
Powder-bed polymer powder, 2:8 old-to-new powder ratio. Consumable quality and storage affect the result: keep filament dry, keep resin out of UV light and handle powder in a controlled area. HPRT specifies the material range for the machine; test the actual material before production.
Software and workflow
Parts are prepared in a slicer or the printer software and sent to the machine via memory card or network, depending on the model. For production use, keep a job library with versioned files and record which machine and material produced each part, so the same result can be repeated.
Key capabilities
- Technology. Selective jet fusion, single agent.
- Build size. 380 x 280 x 380 mm.
- Machine size. 2500 x 1400 x 1570 mm.
- Build speed. 3830 cm³/h.
- Full build time. 11 h.
- Layer thickness. 0.08 mm (0.05-0.15 mm).
- Printheads. Five.
- Print resolution. 1200 dpi.
- Powder ratio. 2:8 old to new.
Where it fits
- functional prototypes and end-use parts
- tooling, jigs and fixtures
- small-batch production without tooling
Typical environment: a design office, workshop or production cell where parts are made in small batches and design changes are frequent.
HPRT 3D printing range at a glance
| Model | Type | Build / process size | Typical use |
|---|---|---|---|
| SJF-P380 | Industrial powder-bed (SJF) | 380 x 280 x 380 mm | Functional parts and small-batch production |
| HAM-PC800 | Powder cleaning | 57 L per batch | Post-processing after printing |
| HAM-PD400 | Deep dyeing | Φ400 x 390 mm | Colouring 3D printed parts |
| F210 | Desktop FDM | 220 x 220 x 250 mm | Prototypes, jigs, teaching |
| FDM-F110 | Entry desktop FDM | 100 x 100 x 85 mm | Education and small models |
| LCD-L228 | LCD resin | 228 x 121 x 300 mm | High-detail prototypes and models |
| LCD-L298 | 8K LCD elastomer | 294 x 160 x 400 mm | Elastomer parts, footwear, robotics |
Technical specifications
| Technology | Selective jet fusion, single agent |
|---|---|
| Build size | 380 x 280 x 380 mm |
| Machine size | 2500 x 1400 x 1570 mm |
| Build speed | 3830 cm³/h |
| Full build time | 11 h |
| Layer thickness | 0.08 mm (0.05-0.15 mm) |
| Printheads | Five |
| Print resolution | 1200 dpi |
| Powder ratio | 2:8 old to new |
Site requirements and installation
Plan power, compressed air (if required by the model), ventilation and floor space before delivery. Powder and resin processes need controlled handling and waste. Confirm the exact services with MAISUI during project scoping.
Selection checklist
- What part size, material and accuracy are required?
- Is the part for prototyping, tooling or end-use production?
- What monthly volume and build frequency should the machine handle?
- Which post-processing steps are needed, and who performs them?
- What power, air and ventilation are available on site?
- Who will operate, maintain and service the machine?
Maintenance and service
Follow the manufacturer service schedule for the hot end, optics, powder handling or resin vat, and keep spare consumables on site. MAISUI provides installation support, training and after-sales service.
Frequently asked questions
What is the SJF-P380?
An industrial powder-bed additive manufacturing system using selective jet fusion technology with a 380 x 280 x 380 mm build volume.
What is the build speed?
3830 cm³/h, with a full build taking about 11 hours.
What layer thickness can it run?
0.08 mm standard, adjustable between 0.05 and 0.15 mm.
How many printheads does it use?
Five printheads at 1200 dpi.
What powder ratio is used?
A 2:8 old-to-new powder ratio.
What post-processing is needed?
Powder removal and optional dyeing; HPRT offers the HAM-PC800 and HAM-PD400 for these steps.
What parts suit this machine?
Functional prototypes, tooling and small-batch production parts.
What site services are required?
Power, compressed air and a stable temperature environment; confirm details before installation.
Can MAISUI support installation?
Yes, installation planning and after-sales support are provided.
Can I get a quotation?
Send part size, material and volume; MAISUI replies with a quotation.