Guangzhou, China · Smart Manufacturing Solutions [email protected] / +86 20 3337 2844
Home/Products/TTO Printers/HPRT FC53-Lc Thermal Transfer Overprinter
HPRT FC53-Lc Thermal Transfer Overprinter
TTO Printers

HPRT FC53-Lc Thermal Transfer Overprinter

HPRT FC53-Lc thermal transfer overprinter: 300 dpi, 53 mm print width, matched ribbons and quotation from MAISUI.

  • FC53-Lc
  • 300 dpi
  • All-metal structure
  • Matched TTO ribbons
Browse the range
MAISUI product teamUpdated 22 Nov 2026Manufacturer brochure, English edition, 2026

The HPRT FC53-Lc is a 300 dpi thermal transfer overprinter with a 53 mm print width and 40-600 mm/s speed for flexible packaging, labels and gloss cards.

Key facts at a glance

Category
Thermal transfer overprinter (TTO)
Brand / model
HPRT FC53-Lc
Resolution
300 dpi (12 dots/mm)
Print width
53 mm

What it is

The HPRT FC53-Lc is a 300 dpi thermal transfer overprinter with a 53 mm print width and 40-600 mm/s speed for flexible packaging, labels and gloss cards. It prints variable data onto flexible film and labels without pre-printed panels.

How it works

  1. Mount the printhead on the packaging machine at the coding position.
  2. Load the ribbon on the 1-inch mandrel and set the print gap.
  3. Configure the message, date rules and code content.
  4. Print test packs and check grade and position.
  5. Track ribbon consumption and clean the printhead on schedule.

Key capabilities

  • Structure. All-metal structure.
  • Resolution. 300 dpi (12 dots/mm).
  • Printing speed. 40-600 mm/s.
  • Print width. 53 mm.
  • Print area. 53 x 75 mm (Li/Ri); 53 x 100 mm (Lc/Rc).
  • Processor. 32-bit RISC processor.

Where it fits

Food packagingBeveragePharmaceuticalLogisticsConsumer goods

Used on pouch, sachet, flow-wrap and label lines where the code changes per pack.

Technical specifications

Structure All-metal structure
Resolution 300 dpi (12 dots/mm)
Printing speed 40-600 mm/s
Print width 53 mm
Print area 53 x 75 mm (Li/Ri); 53 x 100 mm (Lc/Rc)
Processor 32-bit RISC processor
Memory 8 MB flash; 16 MB dynamic
Ribbon capacity 1-inch mandrel, up to 1100 m
Ribbon type Wax / resin, 20-55 mm
Air supply Max. 6 bar / 90 psi
Variants FC53-Li, FC53-Ri, FC53-Lc, FC53-Rc

Selection checklist

  • Which film and code size are used?
  • What line speed must be matched?
  • Intermittent or continuous motion?
  • Which interface does the packaging machine provide?
  • Which ribbon grade matches the film?
  • Who installs and services the coder?

Maintenance and service

Keep the printhead clean, use the specified ribbon and replace worn printheads before code quality drops. MAISUI supplies matched TTO ribbons, spare parts and installation support.

Frequently asked questions

What is the FC53-Lc?

A 53 mm, 300 dpi TTO printer in the HPRT FC53 series.

What print area does it cover?

53 x 75 mm in Li/Ri mode and 53 x 100 mm in Lc/Rc mode.

How fast can it print?

40 to 600 mm/s.

What ribbon does it use?

Wax or resin ribbon, 20-55 mm wide, 1-inch mandrel.

How much ribbon does it take?

Up to 1100 m.

Which materials can it code?

Films, laminates, labels, paper and gloss cards.

Does it need compressed air?

Yes, up to 6 bar / 90 psi.

Can I get a quotation?

Send your film, code and line details through the contact form; MAISUI replies with a quotation.