The HPRT FC32 series is a 300 dpi thermal transfer overprinter with a 32 mm print width, 40-600 mm/s print speed and all-metal structure for flexible packaging lines.
Key facts at a glance
- Category
- Thermal transfer overprinter (TTO)
- Brand / model
- HPRT FC32 Series
- Resolution
- 300 dpi (12 dots/mm)
- Print width
- 32 mm
What it is
The HPRT FC32 series is a 300 dpi thermal transfer overprinter with a 32 mm print width, 40-600 mm/s print speed and all-metal structure for flexible packaging lines. It prints variable data onto flexible film and labels without pre-printed panels.
How it works
- Mount the printhead on the packaging machine at the coding position.
- Load the ribbon on the 1-inch mandrel and set the print gap.
- Configure the message, date rules and code content.
- Print test packs and check grade and position.
- Track ribbon consumption and clean the printhead on schedule.
Key capabilities
- Structure. All-metal structure.
- Printing method. Thermal transfer printing.
- Resolution. 300 dpi (12 dots/mm).
- Printing speed. 40-600 mm/s.
- Print width. 32 mm.
- Print area. 32 x 75 mm (Li/Ri); 32 x 100 mm (Lc/Rc).
Where it fits
Used on pouch, sachet, flow-wrap and label lines where the code changes per pack.
Technical specifications
| Structure | All-metal structure |
|---|---|
| Printing method | Thermal transfer printing |
| Resolution | 300 dpi (12 dots/mm) |
| Printing speed | 40-600 mm/s |
| Print width | 32 mm |
| Print area | 32 x 75 mm (Li/Ri); 32 x 100 mm (Lc/Rc) |
| Processor | 32-bit RISC processor |
| Memory | 8 MB flash; 16 MB dynamic |
| Ribbon capacity | 1-inch mandrel, up to 1100 m |
| Ribbon type | Wax / resin, 20-55 mm |
| Air supply | Max. 6 bar / 90 psi |
| Variants | FC32-Li, FC32-Ri, FC32-Lc, FC32-Rc |
Selection checklist
- Which film and code size are used?
- What line speed must be matched?
- Intermittent or continuous motion?
- Which interface does the packaging machine provide?
- Which ribbon grade matches the film?
- Who installs and services the coder?
Maintenance and service
Keep the printhead clean, use the specified ribbon and replace worn printheads before code quality drops. MAISUI supplies matched TTO ribbons, spare parts and installation support.
Frequently asked questions
What is the FC32 series?
A 300 dpi TTO family with 32 mm print width in four variants (Li, Ri, Lc, Rc).
What print area does it cover?
32 x 75 mm for Li/Ri and 32 x 100 mm for Lc/Rc.
How fast can it print?
40 to 600 mm/s.
What ribbon does it use?
Wax or resin ribbon, 20-55 mm wide, on a 1-inch mandrel.
How much ribbon does it take?
Up to 1100 m.
Does it need compressed air?
Yes, the printer uses air up to 6 bar / 90 psi.
Which films can it code?
PVDC, PET, PE, NY, CPP, OPP, BOPP, BOPET, BOPA and similar films and laminates.
Can I get a quotation?
Send your film, code and line details through the contact form; MAISUI replies with a quotation.