The MS-22 is a desktop 2d barcode scanner for counters, packing benches and fixed scan points. It reads 1D and 2D codes, including QR Code and Data Matrix, and is rated IP52 for everyday retail and warehouse use.
Key facts at a glance
- Category
- Desktop 2D barcode scanner
- Model
- MS-22
- Scan type
- 1D/2D imager
- Sealing
- IP52
- Interface
- USB HID; virtual COM port; optional RS232
- CPU
- per configuration
What it is
The MS-22 is a desktop presentation scanner with a 2D imager. Instead of scanning a laser line it captures an image of the code, so QR codes and other 2D symbols read as easily as ordinary barcodes. It is designed to sit on a counter: the operator presents the code to the window rather than picking up a handheld unit.
How it works
- Place the scanner on the counter and connect the cable.
- Scan the configuration codes for keyboard layout, suffix and interface mode.
- Present the code to the scan window; the LED and buzzer confirm the read.
- Keep the window clean and check the cable and stand at the start of each shift.
Key capabilities
- 1D and 2D decoding. Barcodes, QR Code and Data Matrix with one device.
- Presentation scanning. Fixed position on a counter for hands-free reads.
- Sealed housing. IP52 for retail and warehouse environments.
- Configure once. Keyboard layout, suffix and interface mode are remembered.
- Serviceable. Cable and stand are separate parts for quick replacement.
Where it fits
Typical use is checkout and service counters, packing benches, goods-in desks and fixed scan points where the code is presented to the scanner rather than the scanner moved to the code.
Technical specifications
| Model | MS-22 |
|---|---|
| Scan type | 2D CMOS imager, 1D and 2D codes |
| Image sensor | 640 x 480 pixel |
| Frame rate | 120 fps |
| Host interface | USB HID; virtual COM port; optional RS232 |
| Cable | Standard 1m USB Cable |
| Sealing | IP52 |
| Drop resistance | 1.5 m |
| Dimensions | 77 x 37 x 140 mm |
| Weight | 209 g |
Selection checklist
- Which codes are scanned: 1D only, or QR and Data Matrix as well?
- Are codes printed on labels or shown on screens?
- Is the scan position fixed on a counter, or does the operator move?
- Which host application is used, and what interface does it expect?
- Is a stand or bracket needed?
- Who cleans the window and checks the cable each shift?
Maintenance and service
Wipe the scan window with a soft, slightly damp cloth. Check the cable and stand for wear, and keep a spare cable on site for critical counters. MAISUI supplies replacement cables, stands and spare units, and can pre-configure settings before dispatch.
Frequently asked questions
What codes does it read?
It reads 1D barcodes and 2D codes including QR Code and Data Matrix; test your actual code and material for small or low-contrast cases.
Does it read screen codes?
Yes, 2D imaging reads codes displayed on phones and terminals when brightness and code size are suitable.
What is it used for?
It is a desktop 2d barcode scanner for counters, packing benches, goods-in and fixed scan points.
What interface does it use?
USB HID; virtual COM port; optional RS232
Is it sealed against dust and water?
The unit is rated IP52 for normal retail and warehouse use.
Is a stand or bracket needed?
For fixed-position scanning a stand or bracket is recommended; it keeps the scanning angle consistent and frees the operator’s hands.
Can MAISUI pre-configure it?
Yes. Keyboard layout, suffix and interface mode can be set before dispatch.
Can I get a datasheet and quotation?
Send your application and quantity through the contact form; MAISUI replies with a matched quotation and specification sheet.