Guangzhou, China · Smart Manufacturing Solutions [email protected] / +86 20 3337 2844
Home/Products/Identification & Data Capture/MAISUI MS-9566AI Industrial DPM barcode scanner
A-9566AI barcode scanner
Identification & Data Capture

MAISUI MS-9566AI Industrial DPM barcode scanner

MS-9566AI industrial dpm barcode scanner: 1280 x 800 pixel sensor, 3 mil, USB HID; virtual COM port; optional RS232, IP54. Request a MAISUI quotation.

  • 1280 x 800 pixel, 3 mil
  • USB HID; virtual COM port; optional RS232
  • IP54
  • 158 x 71 x 107 mm
Browse the range
MAISUI product teamUpdated 22 Nov 2026MAISUI product specification, 2026

The MS-9566AI is a direct part mark scanner for manufactured parts. It uses a 1280 x 800 pixel image sensor and reads 1D and 2D codes over USB HID; virtual COM port; optional RS232, with IP54 sealing for everyday industrial use.

Key facts at a glance

Category
Industrial DPM barcode scanner
Model
MS-9566AI
Image sensor
1280 x 800 pixel / Global shutter
Precision
3 mil
Interface
USB HID; virtual COM port; optional RS232
Sealing / drop
IP54 / 1.5 m
Dimensions
158 x 71 x 107 mm

What it is

The MS-9566AI is a direct part mark scanner for manufactured parts. It captures an image of each code instead of scanning a laser line, so QR codes, Data Matrix codes and PDF417 read as easily as ordinary 1D barcodes. The 1280 x 800 pixel sensor covers 3 mil codes and the 60 fps frame rate keeps up with repeated presentation.

It is built for a fixed position: a counter, a conveyor, a machine frame or an OEM enclosure. Once mounted and configured, the operator only presents the code; there is no pairing, no battery and no cable to route for each scan.

How it works

  1. Mount the scanner on its stand, bracket or machine frame at the working distance.
  2. Connect the USB or serial cable to the host or controller.
  3. Scan the configuration codes for interface mode, suffix and keyboard layout.
  4. Present the code; the LED and buzzer confirm each read.
  5. Wipe the window at the start of each shift and check the bracket for movement.

Key capabilities

  • 1D and 2D decoding. Barcodes, QR Code, Data Matrix and PDF417 with one device.
  • Fast imaging. 60 fps frame rate and 3 mil reading for repeated presentation.
  • Fixed installation. Mounts on a stand, bracket or machine frame for hands-free scanning.
  • Standard interface. USB HID; virtual COM port; optional RS232 connects to PCs, terminals and controllers.
  • Industrial protection. IP54 sealing and 1.5 m drop resistance.
  • Configure once. Keyboard layout, suffix and interface mode are set by configuration codes and remembered.
  • Serviceable. Cables and brackets are separate parts, so wear items are quick to replace.
  • Matched accessories. Stands, cables and spare units are available from MAISUI.

Where it fits

AutomotiveAerospaceMachiningElectronicsMedical devicesTooling

Typical use is reading laser-marked, dot-peen, inkjet and etched codes on parts. The scanner can be mounted at the position where the code is presented, so the operator does not pick it up or aim it.

Technical specifications

Model MS-9566AI
Scan type 2D CMOS imager, 1D and 2D codes
Image sensor 1280 x 800 pixel / Global shutter
Minimum element 3 mil
Frame rate 60 fps
Host interface USB HID; virtual COM port; optional RS232
Cable / connection Standard 2m USB Cable
Input voltage 5V±5%
Working current <460 mA
Sealing IP54
Drop resistance 1.5 m
Dimensions 158 x 71 x 107 mm
Weight 166 g
Operating temperature -10 to 50 °C (working)
Humidity 5-95% non-condensing

Mounting and accessories

A stand or bracket holds the scanner at the working distance and angle for reliable reads. Cables, brackets and spare units are available from MAISUI, and configuration settings can be pre-set before dispatch.

Selection checklist

  • Which codes are scanned, and is the code printed, laser-marked or displayed on a screen?
  • How far is the code from the scanner at the mounting position?
  • Is the mounting point on a counter, conveyor or machine frame?
  • Which host or controller receives the data, and what interface does it expect?
  • Is a stand or bracket included, or does it need to be specified?
  • Who cleans the window and checks the mounting each shift?

Maintenance and service

Wipe the scan window with a soft, slightly damp cloth and check the bracket and cable for wear. Keep a spare cable on site for critical stations. MAISUI supplies replacement cables, brackets and spare units, and can pre-configure interface settings before dispatch.

Frequently asked questions

What is this scanner designed for?

It is a direct part mark scanner for manufactured parts. R and similar stations are the typical use.

Which codes can it read?

1D barcodes and 2D codes including QR Code, Data Matrix and PDF417. Test your actual code and material for small or low-contrast marks.

What interface does it use?

USB HID; virtual COM port; optional RS232. It presents to the host as a keyboard or virtual COM port.

Is it protected against dust and water?

The unit is rated IP54 and tested to 1.5 m drop resistance.

Does it need a stand?

A stand or bracket is recommended for fixed-position scanning; it keeps the scanner at the right angle and frees both hands.

Where can it be mounted?

On a counter, conveyor or machine frame, depending on the model and bracket. The MS-9566AI measures 158 x 71 x 107 mm.

Can it read codes on screens?

2D imaging reads screen codes when brightness and size are suitable; test the specific app before standardising.

Can I get a datasheet and quotation?

Send your application, code type and quantity through the contact form; MAISUI replies with a matched quotation and specification sheet.