Guangzhou, China · Smart Manufacturing Solutions [email protected] / +86 20 3337 2844
Home/Products/TTO Printers/Linx TT1000 Thermal Transfer Overprinter
Linx TT1000 Thermal Transfer Overprinter
TTO Printers

Linx TT1000 Thermal Transfer Overprinter

Linx TT1000 thermal transfer overprinter: 300 dpi (12 dots/mm), matched TTO ribbons and quotation from MAISUI.

  • Linx TT1000
  • 300 dpi (12 dots/mm)
  • 53 mm and 107 mm
  • 53 x 75 mm / 107 x 75 mm
Browse the range
MAISUI product teamUpdated 22 Nov 2026Manufacturer brochure, English edition, 2026

The Linx TT1000 is a high-speed airless TTO with 53 mm and 107 mm 300 dpi printheads, printing up to 700 packs per minute on wide flexible packaging.

Key facts at a glance

Category
Thermal transfer overprinter (TTO)
Brand / model
Linx TT1000

What it is

The Linx TT1000 is a high-speed airless TTO with 53 mm and 107 mm 300 dpi printheads, printing up to 700 packs per minute on wide flexible packaging. It prints variable data onto flexible film and labels without pre-printed panels, so dates, batch codes and 2D codes can change every pack.

How it works

  1. Mount the printhead on the packaging machine at the coding position.
  2. Load the ribbon and set the print gap and code position.
  3. Configure the message, date rules and code content.
  4. Print test packs and check grade and position.
  5. Track ribbon consumption and clean the printhead on schedule.

Key capabilities

  • Print resolution. 300 dpi (12 dots/mm).
  • Print heads. 53 mm and 107 mm.
  • Print area (intermittent). 53 x 75 mm / 107 x 75 mm.
  • Print area (continuous). 53 x 300 mm / 107 x 300 mm.
  • Print rate. Up to 700 packs/min (53 mm); up to 450 packs/min (107 mm).
  • Ribbon width. 20-55 mm (53 mm head); 55-110 mm (107 mm head).

Where it fits

Food packagingBeveragePharmaceuticalLogisticsConsumer goods

Used on pouch, sachet, flow-wrap and label lines where the code changes per pack.

Technical specifications

Printer modes Intermittent and continuous in the same printer
Max. print speed 800 mm/s with 53 mm head; 600 mm/s with 107 mm head
Print area (intermittent) 107 x 75 mm
Print area (continuous) 107 x 300 mm
Maximum ribbon length 1200 m
Ribbon width 20-110 mm
Barcodes EAN8, EAN13, UPCA, UPCE, Code 39, Code 128, EAN128, ITF, RSS, Data Matrix, PDF417, QR
Message design Linx CLARiSOFT software
Air supply No compressed air required
User interface 8.0-inch touchscreen
Printer width 225 mm

Selection checklist

  • Which film and code size are used?
  • What line speed must be matched?
  • Intermittent or continuous motion?
  • Which interface does the packaging machine provide?
  • Which ribbon grade matches the film?
  • Who installs and services the coder?

Maintenance and service

Keep the printhead clean, use the specified ribbon and replace worn printheads before code quality drops. MAISUI supplies matched TTO ribbons, spare parts and installation support.

Frequently asked questions

What resolution does the TT1000 print?

300 dpi (12 dots/mm).

Which printheads are available?

53 mm and 107 mm.

What are the print areas?

53/107 x 75 mm intermittent and up to 53/107 x 300 mm continuous.

How fast can it print?

Up to 700 packs per minute with the 53 mm head and 450 packs per minute with the 107 mm head.

Which ribbon widths fit?

20-55 mm for 53 mm head and 55-110 mm for 107 mm head.

Is it airless?

Yes, the Linx TT Series is airless.

What codes can it print?

Dates, batch and lot codes, barcodes and 2D codes.

Can I get a datasheet and quotation?

Send your film, code and line details through the contact form; MAISUI replies with a quotation and specification sheet.