The Dikai D03S and D05S are 300 dpi thermal transfer overprinters with 32 mm and 53 mm print heads, covering 22-55 mm ribbon widths and print speeds from 20 to 670 mm/s.
Key facts at a glance
- Category
- Thermal transfer overprinter (TTO)
- Brand / model
- Dikai D03S / D05S
- Print resolution
- 300 dpi
- Print heads
- 32 mm and 53 mm
- Ribbon width
- 22-55 mm
- Print speed
- 20-670 mm/s
What it is
The Dikai D03S and D05S are 300 dpi thermal transfer overprinters with 32 mm and 53 mm print heads, covering 22-55 mm ribbon widths and print speeds from 20 to 670 mm/s. It prints variable data onto flexible film and labels without pre-printed panels, so dates, batch codes and 2D codes can change every pack.
How it works
- Mount the printhead on the packaging machine at the coding position.
- Load the ribbon and set the print gap and code position.
- Configure the message, date rules and code content.
- Print test packs and check grade and position.
- Track ribbon consumption and clean the printhead on schedule.
Key capabilities
- Print resolution. 300 dpi.
- Print heads. 32 mm and 53 mm.
- Ribbon width. 22-55 mm.
- Print speed. 20-670 mm/s.
- Ribbon length. 600 m.
- Print gap. Down to 0.1 mm.
Where it fits
Used on pouch, sachet, flow-wrap and label lines where the code changes per pack.
Technical specifications
| Print resolution | 300 dpi |
|---|---|
| Print heads | 32 mm and 53 mm |
| Ribbon width | 22-55 mm |
| Print speed | 20-670 mm/s |
| Ribbon length | 600 m |
| Print gap | Down to 0.1 mm |
| Interface | Network interface for system communication |
| Ribbon saving | Ribbon save modes |
Selection checklist
- Which film and code size are used?
- What line speed must be matched?
- Intermittent or continuous motion?
- Which interface does the packaging machine provide?
- Which ribbon grade matches the film?
- Who installs and services the coder?
Maintenance and service
Keep the printhead clean, use the specified ribbon and replace worn printheads before code quality drops. MAISUI supplies matched TTO ribbons, spare parts and installation support.
Frequently asked questions
What is the difference between D03S and D05S?
They are the two models in the D series with 32 mm and 53 mm print heads; the choice depends on code height and film width.
What resolution does it print?
300 dpi.
What ribbon widths are supported?
22 to 55 mm, covering the 32 mm and 53 mm print heads.
How fast can it print?
From 20 mm/s to 670 mm/s depending on mode and code.
Does it have ribbon saving?
Yes, ribbon save modes reduce consumption.
Can it connect to our line system?
It provides a network interface for communication with related systems.
What is the print gap?
Down to 0.1 mm, useful for precise positioning on packaging machines.
Can I get a datasheet and quotation?
Send your film, code and line details through the contact form; MAISUI replies with a quotation and specification sheet.