The Markem-Imaje SmartDate OEM Connect is an OEM integration controller for SmartDate X45 and X65 printheads. It brings coding into the packaging machine’s HMI through a web user interface or VNC, supports 32, 53 or 128 mm printheads, and runs intermittent or continuous at up to 1800 mm/s with X65 printheads. The controller weighs 3 kg; an optional IP66 10.1-inch remote user interface is available.
Key facts at a glance
- Category
- OEM thermal transfer integration controller
- Compatibility
- SmartDate X45 and X65 printheads
- Printheads
- 32 mm, 53 mm or 128 mm
- Resolution
- 300 dpi
- Print speed
- Up to 1800 mm/s with X65; up to 600 mm/s with X45
- Print area
- 32/53/128 x 75 mm intermittent; 32/53/128 x 250 mm continuous
- Interface
- Web UI or VNC via host HMI; USB, RS232 and Ethernet
- Weight
- Controller 3 kg; optional RUI 2.63 kg (IP66)
What the OEM Connect is
The SmartDate OEM Connect is not a standalone printer. It is the integration controller that lets an OEM packaging machine use SmartDate X45 or X65 printheads and control the coder from the machine’s HMI. It is designed for medium-to-high-duty equipment and fits into small cabinet footprints, so the coder can be built into the machine rather than added as a separate unit.
The controller supports 32, 53 and 128 mm printheads, intermittent or continuous line configurations, left- or right-hand mounting, message storage on the controller, USB or network, and Parent/Child control of up to seven printers. A web user interface or Virtual Network Computing (VNC) gives the machine HMI full access to the coder; an optional 10.1-inch colour remote user interface can be mounted anywhere on the packaging machine and is rated IP66.
How it works
- Mount the OEM Connect controller in the packaging machine cabinet and connect the printhead.
- Connect the electrical supply, the 6 bar dry air supply and the printhead cable.
- Connect the controller to the machine HMI through the web user interface or VNC.
- Create or load messages, set dates, batch and serial rules, and adjust print position or image.
- Run the line and monitor status, diagnostics and line-analysis data from the HMI or the optional RUI.
Integration features
- Machine HMI integration. Web user interface or VNC gives the host HMI full SmartDate functionality without a separate screen.
- Compact controller. 3 kg unit designed for small cabinet space and any mounting configuration.
- Printhead choice. 32 mm, 53 mm or 128 mm printheads for different code widths and line layouts.
- X45 and X65 familiarity. Animated help, print/image adjust and configurable password protection match the SmartDate user experience.
- Message storage. Messages can be stored on the controller, on a USB device or on the network.
- Line analysis and diagnostics. Downtime reasons, production metrics and a suite of diagnostic tools are available.
- Detect-Plus and CoLOS. Optional connectivity to Detect-Plus, CoLOS Mark & Read and other CoLOS solutions to eliminate defective codes.
- Fleet control. Parent/Child function controls up to seven printers.
- Optional RUI. 10.1-inch colour remote user interface, IP66, can be positioned anywhere on the packaging machine.
Where it fits
The OEM Connect is aimed at packaging-machine builders and OEMs that want SmartDate coding built into their equipment rather than supplied as a standalone coder. It suits medium-to-high-duty machines, small cabinets and lines where the operator already works from the machine HMI, and supports the same flexible film applications as the X45 and X65 printheads.
Technical specifications
| Function | OEM integration controller for SmartDate X45 and X65 printheads |
|---|---|
| Printheads | 32 mm, 53 mm or 128 mm |
| Print resolution | 300 dpi |
| Configurations | Intermittent and continuous; left- or right-hand mounting with no additional parts |
| Print speed | Up to 1800 mm/s with X65; up to 600 mm/s with X45 |
| Print area | Intermittent: 32/53/128 x 75 mm; continuous: 32/53/128 x 250 mm; extended length available on request |
| Gap between prints | 0.5 mm |
| Ribbon | 20-130 mm wide; up to 1100 m; Xceed, Xtra and Xpert ranges; radial, interlaced, whitespace and negative ribbon advance modes |
| User interface | Web user interface or VNC through the host HMI; optional 10.1-inch colour RUI, IP66; message storage on controller, USB or network |
| Codes and fonts | ITF, Code 39, Code 128, EAN 128, EAN 8, EAN 13, UPC A, UPC E, RSS linear, PDF 417, GS1, DataMatrix, QR and Composite RSS; TrueType fonts including non-Roman characters |
| Inputs / outputs | Print go and 1 configurable input; fault, warning and 2 configurable outputs |
| Software interface | USB; RS232; Ethernet; web browser on host PC; enhanced DCP and NGPCL protocols |
| Other | Parent/Child control for up to 7 printers; line analysis; diagnostics; animated help; print and image adjust; password protection |
| Weight | OEM Connect controller 3 kg; optional RUI 2.63 kg |
| Environment | 0-40 °C; 10-90% RH non-condensing |
| Power | X45 OEM Connect: 100-230 VAC (+/-10%), 50/60 Hz; X65 OEM Connect: 115-230 VAC (+/-10%), 50/60 Hz |
| Air | Consumption from 0.4 ml/print at 2.5 bar; supply 6 bar / 90 psi maximum, dry and uncontaminated |
| Options | Detect-Plus code detection; promotional coding; mounting bracket, encoders and barcode scanner; remote user interface |
| Software | CoLOS Free included for simple message design |
Ribbons and printheads
The OEM Connect uses the same 20-130 mm SmartDate ribbons as the X45 and X65 printheads, up to 1100 m long, with radial, interlaced, whitespace and negative ribbon advance modes. Markem-Imaje recommends the SmartDate Xceed, Xtra and Xpert ranges; MAISUI supplies matched TTO ribbons cut to width and can test the grade on your film.
Selection checklist
- Which printhead does the machine need: 32 mm, 53 mm or 128 mm?
- Does the machine need intermittent, continuous or both configurations?
- What line speed and packs-per-minute rate must the coder support?
- How will the machine HMI connect: web user interface, VNC, DCP or NGPCL?
- Do you need the optional 10.1-inch IP66 RUI in addition to the HMI?
- Is there 6 bar dry air and the correct power supply in the cabinet?
- Do you need Detect-Plus, promotional coding or CoLOS Mark & Read?
- Can the machine builder provide a printhead mounting position and film path for testing?
Maintenance and service
Clean the printhead at the interval your film and dust level require, use dead-dot detection and diagnostics to monitor condition, and replace ribbons and printheads when needed. MAISUI supplies TTO ribbons, supports the OEM Connect with spare parts and after-sales service, and can test the ribbon on your film.
Frequently asked questions
Is the OEM Connect a standalone printer?
No. The OEM Connect is an integration controller for SmartDate X45 and X65 printheads. It is built into an OEM packaging machine and controlled from the machine HMI; a compatible printhead is still required.
Which printheads can it control?
It supports 32 mm, 53 mm and 128 mm SmartDate X45/X65 printheads, in intermittent or continuous configurations.
How fast can it print?
Up to 1800 mm/s with X65 printheads and up to 600 mm/s with X45 printheads. The achievable throughput also depends on the printhead, code size and film.
How does it connect to the machine HMI?
Through a web user interface or VNC on the host HMI, with USB, RS232 and Ethernet, plus enhanced DCP and NGPCL communication protocols. An optional 10.1-inch IP66 RUI can be added.
Does it need compressed air?
Yes. It requires a 6 bar / 90 psi maximum dry, uncontaminated air supply, with consumption from 0.4 ml per print at 2.5 bar.
What is the controller weight?
The OEM Connect controller weighs 3 kg. The optional remote user interface weighs 2.63 kg and is rated IP66.
Which power supply does it need?
The X45 OEM Connect uses 100-230 VAC (+/-10%), 50/60 Hz. The X65 OEM Connect uses 115-230 VAC (+/-10%), 50/60 Hz.
Can it use Detect-Plus and CoLOS?
Yes. Detect-Plus code detection, CoLOS Mark & Read and other CoLOS solutions are available as options to check and eliminate defective codes.
Can I get a quotation for this product?
Send the printhead, machine type, HMI connection and air/power details. MAISUI replies with a matched quotation within 24 hours on business days.